A Comparative Study on Crack-bridging and Microstructural Densification Mechanisms Governing the Mechanical Properties of Fly-ash-based M25 Concrete Modified with MWCNT AND SiO2 NPS
J. Environ. Nanotechnol., Volume 15, No 2 (June 2026) pp. 616-631
Abstract
This study examines the mechanical, microstructural, and hydration-related improvements in concrete modified with fly ash, multi-walled carbon nanotubes (MWCNTs), and nano silica. A comprehensive experimental program, comprising compressive, split tensile, and flexural strength tests along with SEM and XRD analyses, was conducted to evaluate the combined and individual effects of these additives. Fly ash improved the sustainability and long-term performance of concrete through its pozzolanic reaction, although its early-age strength contribution remained moderate. The inclusion of MWCNTs produced the most pronounced mechanical enhancements, with the 0.45% dosage yielding peak strength values due to efficient crack-bridging, improved stress transfer, and accelerated hydration. Nano silica also contributed to performance enhancement by refining pore structure and promoting the formation of a dense C–S–H matrix, with strength increasing progressively with higher dosages. The SEM images confirmed the development of a dense and compact microstructure, while XRD patterns displayed reduced portlandite peaks and enhanced amorphous C–S–H formation in nano-modified mixes. The findings demonstrate that nano-engineered additives, especially MWCNTs, significantly enhance the microstructure, mechanical strength, and durability of the concrete, highlighting their potential for producing high-performance and advanced composite materials.
Full Text
Reference
Abhilash, P. P., Nayak, D. K., Sangoju, B., Kumar, R. and Kumar, V., Effect of nano silica in concrete: A review, Constr. Build. Mater., 278, 122347(2021).
https://doi.org/10.1016/j.conbuildmat.2021.122347
Amudhavalli, N. K. and Ravi, C., A review on nanotechnology in concrete, Int. J. Civ. Eng. Technology, 10(1), 2990–2997(2019).
https://doi.org/10.34218/IJCIET.10.1.2019.262
Ashwini, B. and Vidiveli, B., Effect of multiwalled carbon nanotube incorporation on modulus of elasticity of concrete with fly ash replacement, IOP Conf. Ser. Mater. Sci. Eng., 1070(1), 012037(2021a).
https://doi.org/10.1088/1757-899X/1070/1/012037
Ashwini, B. and Vidivelli, B., Durability analysis of concrete with partial cement replacement using fly ash and MWCNT incorporation, ARPN J. Eng. Appl. Sci., 16(18), (2021b).
Ashwini, B. K., Thavasiraj, K., Lokesh, R., Thasneem Firthos, H. and Adhavan, B., Study on the mechanical performance of carbon nanotube-modified concrete with partial fly ash cement replacement, J. Environ. Nanotechnol., 14(3), 297–304(2025).
https://doi.org/10.13074/jent.2025.09.2521557
Ashwini, B., Comparison of mechanical properties of concrete incorporated with multiwalled carbon nanotube and partial replacement of cement with fly ash, Mater. Today Proce., (2023)
https://doi.org/10.1016/j.matpr.2023.12.006
Cuenca, E., D'Ambrosio, L., Lizunov, D., Tretjakov, A., Volobujeva, O. and Ferrara, L., Mechanical properties and self-healing capacity of UHPC with alumina nano-fibres, Cem. Concre. Compos., 118, 103956(2021).
https://doi.org/10.1016/j.cemconcomp.2021.103956
Fan, J., Li, G., Deng, S., Deng, C., Wang, Z. and Zhang, Z., Effect of carbon nanotube and styrene-acrylic emulsion additives on cement paste, Mater., 13(12), 2807(2020).
https://doi.org/10.3390/ma13122807
Foldyna, J., Foldyna, V. and Zeleňák, M., Dispersion of carbon nanotubes for application in cement composites, Procedia Eng., 149, 94–99(2016).
https://doi.org/10.1016/j.proeng.2016.06.643
Krishnaveni, C. and Senthil, S. S., Study on nano-alumina in concrete', Mater. Today: Proce., 46, 3648–3652(2021).
https://doi.org/10.1016/j.matpr.2021.01.809
MacLeod, A. J. N., Gates, W. P. and Collins, F., Durability of Portland cement–carbon nanotube nanocomposites, Mater., 13(18), 4097(2020).
https://doi.org/10.3390/ma13184097
Mahdikhani, M., Bamshad, O. and Fallah, S. M., Mechanical properties and durability of concrete with nano silica under acid rain, Constr. Build. Mater., 167, 929–935(2018).
https://doi.org/10.1016/j.conbuildmat.2018.01.137
Moein, M. M., Rahmati, K., Saradar, A., Moon, J. and Karakouzian, M., Review of modified concretes with different nanomaterials, Mater., 17(2), 409(2024).
https://doi.org/10.3390/ma17020409
Norhasri, M. M., Hamidah, M. S. and Fadzil, A. M., Applications of nanomaterials in concrete, Constr. Build. Mater., 133, 91–97(2017).
https://doi.org/10.1016/j.conbuildmat.2016.12.005
Purohit, R., Purohit, K., Rana, S., Rana, R. S. and Patel, V., Carbon nanotubes and their growth methods, Proce. Mater. Sci., 6, 716–729(2014).
https://doi.org/10.1016/j.mspro.2014.07.088
Rao, N. V., Rajasekhar, M., Vijayalakshmi, K. and Vamshykrishna, M., Influence of nanotechnology on civil engineering materials, Procedia Mater. Sci., 10, 111–115(2015).
https://doi.org/10.1016/j.mspro.2015.06.032
Rhee, I. and Roh, Y. S., Properties of normal-strenght concrete and mortar with multi-walled carbon nanotubes, Magazine Concr. Res., 65(16), 951–961(2013).
https://doi.org/10.1680/macr.12.00212
Wang, B. M., Liu, S., Han, Y. and Leng, P., Preparation and durability of cement-based composites doped with multi-walled carbon nanotubes, Nanosci. Nanotechnol. Lett., 7(5), 411–416(2015).
