Open Access

Evaluation of Impact Resistance and Interlaminar Shear Strength in Hybrid Composites of Kevlar, Hemp, and Carbon Fibers for Structural Applications

H. Madhusudhana Reddy, Department of Mechanical Engineering, University of Visvesvaraya College of Engineering, Bangalore, KA, India
Department of Mechanical Engineering, Sreenidhi Institute of Science and Technology, Hyderabad, TG, India H. K. Shivanand, Department of Mechanical Engineering, University of Visvesvaraya College of Engineering, Bangalore, KA, India Jayakiran Reddy Esanakula ejkiran@gmail.com
Department of Mechanical Engineering, Sreenidhi Institute of Science and Technology, Hyderabad, TG, India

---

---

Abstract

The hybrid composites made using both synthetic and natural fibers are an ecofriendly alternative to conventional construction materials. This paper investigates the effect of hybridization of Kevlar, hemp and carbon fibers in the matrix of epoxy on impact resistance and interlaminar shear strength (ILSS). The composites were fabricated using the hand layup technique. Then, they were tested and evaluated for interlayer bonding contribution to resist shear stress. The results demonstrate that the impact resistance values (12.5 J and 15.8 J for 3 mm and 5 mm specimens, respectively), and ILSS values (6.8 MPa and 8.4 MPa) are superior on comparing with other materials (asbestos, cement and galvanised iron). The lightweight design and ecological advantages also make the composites well suited for use in roofing, cladding and protective structures.

Full Text

Reference

---

Anand, M. K. R., Muthusamy, S., Panchal, H., Ibrahim, A. M. M., Alsoufi, M. S. and Elsheikh, A. H., Investigation of mechanical properties of dual-fiber reinforcement in polymer composite, J. Mater. Res. Technol., 18, 3908–3915(2022).

https://doi.org/10.1016/j.jmrt.2022.04.053

Ashik, J. K., Preethi, M., Devan, R. D., Senbagan, M., Seralathan, S. and Hariram, V., Analysis of Low-Velocity Impact Properties of Kevlar 149-Carbon Fiber Reinforced Polymer Matrix Composites, Int. J. Veh. Struct. Syst., 13(5), 584-589(2021).

https://doi.org/10.4273/ijvss.13.5.08

Gangadhara, H. S., An Investigation on Wear, Hardness and Impact Behaviour of Hybrid Composites, Int. J. Res. Appl. Sci. Eng.Technol., 9(10), 538–546(2021).

https://doi.org/10.22214/ijraset.2021.38430

Gondi, K. R. and Jayakiran, R. E, Mechanical Characterization of Fiber-Reinforced Composites with Eggshell Powder for Diverse Applications, Lecture Notes in Mechanical Engineering, Springer, Singapore, 343-351(2024).

https://doi.org/10.1007/978-981-97-4947-8_28

Gondi, K. R. and Madhusudhana, R. H., Study of Mechanical Properties of Coconut Coir Fiber-Reinforced Polymer Composites, Recent Trends Mech. Eng., 26, 341-351(2020).

https://doi.org/10.1007/978-981-15-7557-0_30

‌Jani, S. P., Kumar, A. S., Khan, M. A., Sajith, S. and Saravanan, A., Influence of Natural Filler on Mechanical Properties of Hemp/Kevlar Hybrid Green Composite and Analysis of Change in Material Behavior Using Acoustic Emission, J. Nat. Fibers, 18(11), 1580–1591(2019).

https://doi.org/10.1080/15440478.2019.1692321

Karthik, K., Rajamani, D., Raja, T. and Subramani, K., Experimental investigation on the mechanical properties of Carbon/Kevlar fibre reinforced epoxy LY556 composites, Mater. Today Proc., 52, 668–674(2022). h

https://doi.org/10.1016/j.matpr.2021.10.077

Katrien, V., Vasile, S., Vermeire, S., Vanderhoeven, M., Van, Joos, L., Raeve, A. D. and Troch, V., Hemp (Cannabis sativa L.) for high-value textile applications: The effective long fiber yield and quality of different hemp varieties, processed using industrial flax equipment, Ind. Crops Prod., 158, 112969–112969 (2020).

https://doi.org/10.1016/j.indcrop.2020.112969

Madhusudhana, R. H., Venkatesh, C. and Bhagwat, Manufacturing and Properties Analysis of Fibre Reinforced Polymer Composites, Int. J. Sci. Res. Sci. Eng. Technol., 6(1), 458-464(2019).

https://doi.org/10.32628/IJSRSET196181

Negi, A. S., Katiyar, J. K., Kumar, S., Kumar, N. and Patel, V. K., Physicomechanical and abrasive wear properties of hemp/Kevlar/carbon reinforced hybrid epoxy composites, Mater. Res. Express, 6(11), 115304 (2019).

https://doi.org/10.1088/2053-1591/ab438d

Ramesh, M., Deepa, C., Arpitha, G. R. and Gopinath, V., Effect of hybridization on properties of hemp-carbon fibre-reinforced hybrid polymer composites using experimental and finite element analysis, World J. Eng., 16(2), 248-259(2019).

https://doi.org/10.1108/WJE-04-2018-0125

Sangilimuthukumar, J., Senthil, M. K. T., Sanjay, M. R. and Suchart, S., Experimental studies on the absorption, swelling and erosion performance of hybrid woven Kevlar/hemp reinforced epoxy composites, Express Polym. Lett., 17(4), 353-372(2023).

https://doi.org/10.3144/expresspolymlett.2023.26

Veeranjaneyulu, K., Sudhir, K. C., Joshi, S. and Sravanthi, G., Characterization of Kevlar jute hybrid composite, Mater. Today Proc., 2214-7853(2023).

https://doi.org/10.1016/j.matpr.2023.07.318