High-Efficiency Microfluidic Channels for Enhanced Nanoparticle Behavior in Sustainable Fluids
J. Environ. Nanotechnol., Volume 13, No 4 (2024) pp. 399-405
Abstract
In this study, it focuses specifically on the microfluidic channel. And the way of approaching the pattern through literature. The pattern provides the mixing in an enhanced manner. To meet the requirement of efficient mixing part of simulation that it influenced through iteration. The provision of 3D design that entails the simulation of such patterned mesh. To get the integrated pattern towards the single mold that facilitates the channel for fluid flow that tenses toward mixing. It can be studied through simulation and iteration. The study includes iterative literature and simulation to make it fine tune channel design and target better mixing conditions. Specifically on nanoparticles such as neem to impact it. Through the 3D design and simulation, a structure of mesh pattern was developed, which acts as origin for mold that promotes or facilitates the effective flow of fluid. That induces turbulence and improves mixing within the microchannel; it enables particle distribution. The iteration process plays a crucial role in improving the entire efficiency, with every iteration bringing channel closer to desired performance. These findings are the instrument for experiments studies on channel design. This work delves into the optimization of microfluidic channels for nanoparticle synthesis, focusing on advanced design patterns to improve mixing efficiency. Using Neem extract and silver nitrate at varying concentrations, the study explores how the microfluidic device facilitates effective nanoparticle synthesis. The iterative design and simulation processes play a crucial role in achieving the desired mixing conditions. The findings offer valuable insights for future experimental studies and applications in nanoparticle synthesis. The focus lies in optimizing the microfluidic channels to mix better, especially for nanoparticle synthesis using Neem extract and silver nitrate. Focus on iterative design, simulation, and 3D modeling to improve microfluidic performance. Develop sophisticated mesh patterns in the microfluidic channels to cause turbulence and enhance fluid mixing. Use of 3D design and simulation to optimize the design of channel structure to produce the best flow of fluid and homogeneous particle distribution. The objective is to fill the gap that exists between computational design and the actual applications to improve the efficiency of microfluidic systems in real nanoparticle synthesis.
Full Text
Reference
Batubara, A. S., Obaid, N. A., Alharbi, H. M., Altalhi, T. M., Alasmari, M. A., Alghamdi, A. Z. and Sharmin, E., Chitosan nanocomposite film incorporating Nigellasativa oil, Azadirachta indica leaves extract and silver nanoparticles, e-Polymers, 23(1), 20228083 (2023).
https://doi.org/10.1515/epoly-2022-8083
Bezelya, A., Küçüktürkmen, B., and Bozkır, A., Microfluidic Devices for Precision Nanoparticle Production, Micro., 3(4), 822–866 (2023).
https://doi.org/10.3390/micro3040058
Cao, X., Zhou, B., Yu, C., and Liu, X., Droplet-based mixing characteristics in bumpy serpentine microchannel, Chem. Eng. Process. - Process Intensif., 159, 108246 (2021).
https://doi.org/10.1016/j.cep.2020.108246
Chen, L., Wang, G., Lim, C., Seong, G. H., Choo, J., Lee, E. K., Kang, S. H., and Song, J. M., Evaluation of passive mixing behaviors in a pillar obstruction poly(dimethylsiloxane) microfluidic mixer using fluorescence microscopy, Microfluid. Nanofluidics., 7(2), 267–273 (2009).
https://doi.org/10.1007/s10404-008-0386-1
Chen, X., Topology optimization of microfluidics — A review, Microchem. J., 127, 52–61 (2016).
https://doi.org/10.1016/j.microc.2016.02.005
Fodor, P. S., and Kaufman, M., Time Evolution of Mixing in the Staggered Herringbone Microchannel, Mod. Phys. Lett. B, 25(12n13), 1111–1125 (2011).
https://doi.org/10.1142/S0217984911026826
Gimondi, S., Ferreira, H., Reis, R. L., and Neves, N. M., Microfluidic Devices: A Tool for Nanoparticle Synthesis and Performance Evaluation, ACS Nano., 17(15), 14205–14228 (2023).
https://doi.org/10.1021/acsnano.3c01117
Hu, X., Yang, F., Guo, M., Pei, J., Zhao, H., and Wang, Y., Fabrication of polyimide microfluidic devices by laser ablation based additive manufacturing, Microsyst. Technol., 26(5), 1573–1583 (2020).
https://doi.org/10.1007/s00542-019-04698-4
Jiang, Y., Wang, H., Li, S., and Wen, W., Applications of Micro/Nanoparticles in Microfluidic Sensors: A Review, Sensors, 14(4), 6952–6964 (2014).
https://doi.org/10.3390/s140406952
Kee, S. P., and Gavriilidis, A., Design and characterisation of the staggered herringbone mixer, Chem. Eng. J., 142(1), 109–121 (2008).
https://doi.org/10.1016/j.cej.2008.02.001
Kulkarni, M. B., and Goel, S., Microfluidic devices for synthesizing nanomaterials—a review, Nano Express, 1(3), 032004 (2020).
https://doi.org/10.1088/2632-959X/abcca6
Kumari, S. A., Patlolla, A. K., Madhusudhanachary, P., Biosynthesis of Silver Nanoparticles
Using Azadirachta indica and Their Antioxidant and Anticancer Effects in Cell Lines, Micromachines (Basel)., 13(9), 1416 (2022).
https://doi.org/10.3390/mi13091416
Nady, E., Nagy, G., Huszánk, R., Functionalization of microfluidic devices by microstructures created with proton beam lithography, Vacuum, 190, 110295 (2021).
https://doi.org/10.1016/j.vacuum.2021.110295
Niculescu, A. G., Mihaiescu, D. E., and Grumezescu, A. M., A Review of Microfluidic Experimental Designs for Nanoparticle Synthesis, Int. J. Mol. Sci., 23(15), 8293 (2022).
https://doi.org/10.3390/ijms23158293
Niculescu, A. G., Chircov, C., Bîrcă, A. C., Grumezescu, A. M., Fabrication and Applications of Microfluidic Devices: A Review, Int. J. Mol. Sci., 22(4), 1-26 (2011).
https://doi.org/10.3390/ijms22042011
Pawinanto, R. E., Yunas, J., and Hashim, A. M., Design optimization of active microfluidic mixer incorporating micropillar on flexible membrane, Microsyst. Technol., 25(4), 1203–1209 (2019).
https://doi.org/10.1007/s00542-018-4134-5
Razavi, B. S., Rouhi, O., Raoufi, M. A., Ejeian, F., Asadnia, M., Jin, D., and Ebrahimi Warkiani, M., 3D Printing of Inertial Microfluidic Devices, Sci. Rep., 10(1), 5929 (2020).
https://doi.org/10.1038/s41598-020-62569-9
Rhoades, T., Kothapalli, C. R., and Fodor, P. S., Mixing Optimization in Grooved Serpentine Microchannels, Micromachines, 11(1), 61 (2020).
https://doi.org/10.3390/mi11010061
Seo, H. S., Han, B., and Kim, Y.J., Numerical Study on the Mixing Performance of a Ring-Type Electroosmotic Micromixer with Different Obstacle Configurations, J. Nanosci. Nanotechnol., 12(6), 4523–4530 (2012).
https://doi.org/10.1166/jnn.2012.6188
Stroock, A. D., Dertinger, S. K. W., Ajdari, A., Mezić, I., Stone, H. A., and Whitesides, G. M., Chaotic Mixer for Microchannels, Science, 295(5555), 647–651 (2002).
https://doi.org/10.1126/science.1066238
Tony, A., Badea, I., Yang, C., Liu, Y., Wells, G., Wang, K., Yin, R., Zhang, H., and Zhang, W., The Additive Manufacturing Approach to Polydimethylsiloxane (PDMS) Microfluidic Devices: Review and Future Directions, Polymers (Basel), 15(8), 1926 (2023).
https://doi.org/10.3390/polym15081926
Ward, K. and Fan, Z. H., Mixing in microfluidic devices and enhancement methods, J. Micromech. Microengg., 25(9), 094001 (2015).
https://doi.org/10.1088/0960-1317/25/9/094001
Whui, D. W., Mohd, F. M., Chin, W. L., Suresh, S., Nurhidayatullaili, M. J., Enhancement of mixing and reaction efficiency of various fluids applications at different microfluidic configuration and design, Chem. Eng. Process. Process Intensif.,
, 109729 (2024).
https://doi.org/10.1016/j.cep.2024.109729
Xu, L., Wang, Y., Huang, J., Chen, C. Y., Wang, Z. X. and Xie, H., Silver nanoparticles: Synthesis, medical applications and biosafety, Theranostics,
(20), 8996–9031(2020).
https://doi.org/10.7150/thno.45413
Yu, H., Nguyen, T.-B., Ng, S. H., and Tran, T., Mixing control by frequency variable magnetic micropillar, RSC Adv., 6(14), 11822–11828 (2016).
https://doi.org/10.1039/C5RA24996A
Zhou, B., Xu, W., Syed, A. A., Chau, Y., Chen, L., Chew, B., Yassine, O., Wu, X., Gao, Y., Zhang, J., Xiao, X., Kosel, J., Zhang, X.-X., Yao, Z., and Wen, W., Design and fabrication of magnetically functionalized flexible micropillar arrays for rapid and controllable microfluidic mixing, Lab Chip., 15(9), 2125–2132 (2015).
https://doi.org/10.1039/C5LC00173K
Zhu, J., Wang, M., Zhang, H., Yang, S., Song, K.-Y., Yin, R., and Zhang, W., Effects of Hydrophilicity, Adhesion Work, and Fluid Flow on Biofilm Formation of PDMS in Microfluidic Systems, ACS Appl. Bio Mater., 3(12), 8386–8394 (2020).
