Current Issue
J. Environ. Nanotechnol.
pISSN: 2279-0748
eISSN: 2319-5541
CODEN: JENOE2
Journal of Environmental Nanotechnology
Published by
Institute for Environmental Nanotechnology
www.nanoient.org
J. Environ. Nanotechnol.
Volume: 13 Issue No: 3
Date of Publication: 30-09-2024
ISSN (Print): 2279-0748
ISSN (Online): 2319-5541
Articles
Prediction of Solar Radiation using Deep LSTM-based Machine Learning Algorithm
K. C. Jayasankar, G. Anandhakumar, A. Kalaimurugan
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 01-08
Insights on pH-dependent Physicochemical Properties and Supercapacitance Ability of α-MoO3
P. Janardhanan, Varuna Jayachandran, M. Elango, J. Manikandan
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 09-13
Optimization of Material Removal Rate and Wear Rate in EDM Machining of Inconel 625 Using a Novel Nano Al-Ni Composite Electrode: A Response Surface Methodology Approach
Y. Justin Raj, A. Bovas Herbert Bejaxhin, S. Rajkumar, P. Sujin, R. Christu Paul, Justin Sam George
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 14-24
Ultrafine GGBS and Fly Ash as Cement Replacement for Sustainable Concrete
Harshit Saxena, Vikas Srivastava, Ashish Kumar Yadav, Ashok Kumar Tiwari
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 25-30
Synthesis, Characterization and Influence of Copper Nanoparticles on Growth of Vigna mungo L. Hepper CO-7 Variety
Chitra Krishnasamy, P. Srinithi , R. Naveena, J. Merlin Seles, A. Aksharadevi
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 31-40
In Situ Synthesis of ZnCo2O4 and Pd@ZnCo2O4 Nanocomposites for Dye Degradation and Biological Applications
Supriya Gumma, Puthalapattu Reddy Prasad, Sandhya Punyasamudram, Adikay Sreedevi, Venkata Nagendra Kumar Putta, Phani Raja Kanuparthy
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 41-51
Studies on Alkaline Activator, Manufacturing Methods and Mechanical Properties of Geopolymer Concrete - A Review
M. Nanthini, R. Ganesan, V. Jaganathan
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 52-72
Experimental Investigation of the Durability of Ambient-Cured Metakaolin-Based Geopolymer Concrete in Different Sustainable Environmental Conditions
M. Nanthini , R. Ganesan, V. Jaganathan
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 73-81
Energy Potential and Properties of Agro Biomass Briquettes with Nano Kaolin Binder for Sustainable Environment
D. Ambika, N. Atthikumaran, R. Boopathi, E. K. Mohanraj
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 82-88
Incorporation of Nanoalumina in Potassium Feldspar-based Phosphoric Acid Activated Geopolymer Composites: A Sustainable Approach
M. Nanthini, R. Ganesan, V. Jaganathan
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 89-98
Experimental investigation of Camellia Sinensis Dust Filler on the Vachellia Nilotica Blended Hybrid Epoxy Composites: A Comprehensive Analysis of Mechanical, Viscoelastic, and Dielectric Behavior
D. Rama Devi, B. Saritha
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 99-107
Facile Synthesis and Characterization of Pure and Bi-doped ZnS Nanoparticles for Photocatalytic Application
T. Shobana, T. Venkatesan, R. Sakthi Sudar Saravanan, D. Kathirvel, K. Valliyammal
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 108-114
Photocatalytic Degradation of Transition Metal (Ni) Doped ZnS Nanoparticles Synthesized via Simple Solvothermal Route
K. Valliyammal, R. Sakthi Sudar Saravanan
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 115-122
ZnSnS Nanoparticles Synthesized by Simple SMI Technique for Photocatalytic Application
K. Valliyammal, R. Sakthi Sudar Saravanan
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 123-132
Characterization and Ambient Temperature Hydrogen Sulfide Sensing of Annealed NiO-MnO₂ Thin Films Prepared via Jet Nebulizer Spray Pyrolysis
S. Saranya, N. Sethupathi, P. Mahalingam, P. Sivakumar
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 133-139
Investigation of Snake Grass/Casuarina/Cork Filler Reinforced Bio Polymer Hybrid Composite
C. Parthasarathy, K. Mayandi, S. Karthikeyan, S. Senthilrajan
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 140-144
Application of Catalysts Used in Biodiesel Production - A Review
L. Nawin, Manash Kumar, Darshan , Chandrakant Thakur
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 145-151
Optical Study on Co-Sensitization of Betanin Dye with Cadmium Sulfide to Fabricate Dye Sensitized Solar Cell
D. S. Suresh, Sapna Sharanappa, S. P. Vijaykumar, Abdullah Ba Shbil, H. Ganesha, H. Devendrappa
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 152-160
A Complete Review on DC-to-DC Converter Topologies for Energy Sustainable Electro-mobility under Environmentally Heterogeneous Power Conditions
D. Ramya, K. Umadevi
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 161-170
Integral and Surface Treatment Method of Waterproofing: A Review and Comparative Analysis
Aniket Bansal, Balwinder Lallotra, Aman Sehgal
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 171-187
Environmental Assessment in Panguil and Iligan Bay, Philippines: Review and Future Perspectives
Joemar S. Macalisang, Jeffrey Ken B. Balangao, Ferlyn V. Logronio
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 188-196
Experimental Analysis of EDM Parameters on D2 Die Steel Using Nano-aluminum Composite Electrodes
Y. Justin Raj, A. Bovas Herbert Bejaxhin, R. Madhumitha, A. S. Anitha, Hitesh Gehani, Aslam Abdullah , V. Naveenprabhu
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 197-206
Optimization and Characteristics of Multimodal Binder on Polymer Nanocomposite for Lightweight Applications
S. Karthikeyan, S. Manivannan, R. Venkatesh, S. Karthikeyan, R. Anand, S. V. Sasikaran
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 207-216
Impacts of Zirconium Carbide Incorporated Magnesium Alloy Nanocomposite on Wear Properties
Pandian Rajendiran, Vinayagam Mohanavel
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 217-221
BioRicinus Communis Seed Extract was Used in the Green Manufacture of Zero-valent Iron Nanoparticles for Photocatalyst Elimination of Chromium
Natrayan Lakshmaiya
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 222-229
Investigation on Flexural Behavior of HFRC with Partial Replacement of Nano Silica and Slag Cement
S. Venkat Raman, G. Anusha, A. Alex Livingston Raja, S. Anandaraj, K. Gowtham, V. Gopi Krishnan, T. Karthick
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 230-236
Assessing the Durability, Mechanical, and Microstructural Properties of Nanosilica-enhanced Coconut Shell Concrete: A Sustainable Approach
Pooja Damodaran, Manigandan Nagarajan, Lakshmi Thangasamy
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 237-245
Enhancing Drilling Performance in Natural Fiber-Reinforced Biocomposites Using Taguchi Method for Sustainable Manufacturing
K. Raja, M. S. Senthil Kumar, A. Karthik, L. Sampath Kumar
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 246-252
Influences of hybrid fiber on functional and drilling characteristics study of polymer hybrid Nanocomposite
N. Lenin Rakesh, K. Selvakumar, V. Mohanavel
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 253-261
Impact of Binder Selection on Functional Properties of Polymer Nanocomposite Featured with Metal Oxide Nanoparticle
S. Karthikeyan, S. Manivannan, R. Venkatesh, S. Karthikeyan, Atanu Kuila, S. Lakshmanan
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 262-270
Optimizing the Tensile and Flexural Properties of Flax/Sisal with SiO2 Nanocomposites Using Response Surface Methodology
M. Vanitha Lakshmi, G. Aloy Anuja Mary, I. Chandra, E. Sivanantham, N. Bharatha Devi
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 271-281
Evaluation of the Mechanical Properties of Aluminium Hybrid Nano Composites Using Ultrasonic-Assisted Stir Casting Method and Reinforced with Nano-scale SiC and MoS2 Particles
D. Sudarsan, A. Bovas Herbert Bejaxhin, S. Raj Kumar, A. S. Anitha, Venkat Prasat Sridhar
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 282-288
An Experimental Investigation on Nano-Enhanced Tertiary Blended Concrete Incorporating Industrial Wastes
Kiran Kumar Poloju, Shalini Annadurai, Mallikarjuna Rao, Prabu Baskar, K. S. Elango
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 289-296
Alkali and Non-alkali Treated Coconut Coir Fiber-Reinforced Coconut Shell Powder/MWCNT-Filled Polyester Matrix Composite: An Experimental Comparison
S. Ramu, Gedion Habtay Gebremicheal, Rajesh Mohan, R. Suresh Kumar, M. Karthigairajan, V. Masannan, M. Yuvaperiyasamy, S. Durga
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 297-304
Impact of Harmonic Voltage on the Partial Discharge Properties of Eco-Friendly Nanofluid
S. Balaji, S. Chandrasekar
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 305-310
Balancing Sustainability and Strength: Analyzing the Effects of Textile, Tannery, and Water Treatment Sludge on Brick Performance
Mehna Najeem Arisiketty, Daniel Cruze
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 311-320
Enhancing Surface Quality and Tool Longevity in EDM of D2 Steel Using Copper Composite Tools
Navuluri Padma Sravya, R. Manimegalai, R. Rajeswari, M. Gowtham, R. S. Achsah, S. Naveen
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 321-331
Eco-Friendly Concrete Solutions: The Role of Titanium Dioxide Nanoparticles in Enhancing Durability and Reducing Environmental Pollutants - A Review
Jegatheeswaran Dhanapal, Sridevi Saravanan, Sridhar Jayaprakash, Vivek Sivakumar, Senthil Kumar Muniasamy, Vivek Deivasigamani, Balaji Shanmugam, V. Sampathkumar
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 332-344
Physical, Mechanical and Thermal Characterization of Areca, Pineapple and Glass Fiber Reinforced Polymer Composites for Aerospace Applications
N. Lenin Rakesh, K. Selvakumar, V. Mohanavel
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 345-352
Photocatalytic Degradation of Acetaminophen Using Carbon-TiO2 Nanocatalyst Extracted from Hibiscus Flower under Visible Light
K. E. Viswanathan, K. Dhivya, G. Anusha, S. Anandaraj
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 353-360
An Experimental Study on Algae Biodiesel with Nano-additives for Engine Performance and Emission Reduction
Amala Justus Selvam, R. Arunraj
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 361-373
Multifaceted Analysis of L-Alanine-Doped Creatininium Benzene Sulphonate Single Crystals for Optical Modulation Application
C. Ramajeya, K. Balasubramanian
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 374-384
Reduction of Emission and Fuel Consumptions based on Mingled Nano Additives in Biodiesel
N. Krishnamoorthy, R. Sathishkumar, S. Dhivakar, N. Ramanan
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 385-391
Dynamic Analysis of Laminated Composite with Inclusion
A. Usha Bharathi, P. Irin Maria, S. Maithreyi , N. Soorya Sree
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 392-399
Effect of Injection Timing on Performance and Emission of a Diesel Engine using Fuelled by Hydrogen Gas
Ram Narayan Bhagat, Kunja Bihari Sahu, Surendra Kumar Ghadai, Chandra Bhushan Kumar, Ashis Kumar Saha
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 400-407
An Investigation into the Impact of Nano-Additives on the Performance and Emission Levels of a Diesel Engine Fuelled by Nahar Biodiesel
R. Rohith Renish, Amala Justus Selvam
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 408-417
Emerging Diagnostic Methods Using Paper-based Electrochemical Biosensors
Parimala Gandhi Karuppannan, D. Sudha, K. Banupriya, K. Karthik, Revathi Arumugam
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 418-423
Impact Loading on Polymer Nanocomposites - A Comprehensive Review
R. Suresh Kumar, M. Yuvaperiyasamy, R. Sathish, P. K. Miniappan, R. Premkumar, P. Arivalagan
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 424-434
Innovative Use of Eco-Enzymes for Domestic Wastewater Purification
Sahil Salvi, Ranjeet Sabale, Sudarshan Bobade , Arun Dhawale
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 435-439
A Critical Review on Polymer Composites Reinforced with Artificial Fibers using Fused Deposition Modelling
Anandha Moorthy Appusamy, Senthil Kumar Laxmanan, Madheswaran Subramaniyan, Pon. Maheskumar, K. Suresh Kumar, R. Girimurugan
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 440-448
Characterization of Mechanical Properties of Ramie/SiO2 Hybrid Composite by Incorporation of Kenaf Fiber
G. Aloy Anuja Mary, P. Uma, R. Ramya, T. Sunitha, Rukmani Devi
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 449-455
Investigation of BaZrO3 Nanoparticles for Photocatalytic Activity and the Effects of Y-doping
C. Chinnusamy , R. Thiyagarajan
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 456-466
Modelling for Predicting and Optimizing of the Tensile and Flexural Properties of Sisal/Carbon Fibre Nano-Composite through RSM
K. Aanandha Saravanan, N. Arunachalam, P. Uma, K. Saravanan, Jothi Arunachalam
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 467-477
Fabrication and Thermal Analysis of Nano-structured Heat Transfer Medium and Novel Conical-shaped Solar Greenhouse Device
R. Ranjith, P. J. Jegan Babu, R. V. Jeba Rajasekhar, K. Pitchaimani
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 478-487
