Biodiesel Synthesis over Mesoporous Solid Acid Catalyst
J. Environ. Nanotechnol., Volume 8, No 3 (2019) pp. 16-23
Abstract
A simple and new hydrothermal method was adopted to synthesize CuAlPO4 and MgAlPO4 catalysts by using Triethylamine as a template. The synthesized catalysts were characterized by using FT-IR, XRD, SEM and BET. These characterization techniques have proved the formation of tetrahedral frameworks of CuAlPO4 and MgAlPO4 catalysts. The biodiesel synthesis reaction has been carried out with ethanol. The experimental conditions like contact time, temperature, mole ratio and catalyst dosage were optimized for maximum conversion. Conversion of biodiesel and selectivity of biodiesel was more on CuAlPO4 than MgAlPO4.
Full Text
Reference
Campelo, J. M., Jaraba, M., Luna, D., Luque, R., Marinas, J. M. and Romero, A. A., Effect of phosphate precursor and organic additives on the structural and catalytic properties of amorphous mesoporous AIPO4 materials, Chem. Mater., 15(17), 3352-3364 (2003).
https://dx.doi.org/10.1021/cm030206+
Campelo, J. M., Marinas, J. M., Mendioroz, S. and Pajares, J. A., Texture and surface chemistry of aluminium phosphates, J. Catal., 101(2), 484-495 (1986).
https://dx.doi.org/10.1016/0021-9517(86)90275-7
Cheralathan, K., Kannan, C., Palanichamy, M. and Murugesan, V., Ethylation of tolyene over aluminophosphate based molecular sieves in the vapour phase, Ind. J. Chem. Technol., 39A:921-927 (2000).
Elangovan, S. P., Kannan, C., Arabindoo Banumathi and Murugesan, V., Aniline methylation over AFI and AEL type molecular sieves, Applied Catalysis A: General, 174(1-2), 213-219 (1998).
https://dx.doi.org/10.1016/S0926-860X(98)00189-6
Jing Yu, Anjie Wang, Xiang Li, Juan Tan, Yongkang Hu, An improved calcinations route to obtain high quality mesoporous aluminophosphates materials, Mater. Lett., 61(13), 2620-2623 (2007).
https://dx.doi.org/10.1016/j.matlet.2006.10.009
Melo, A. A. Rogerio, Giotto, M. V., Rocha, J. and Urquieta Gonzalez, E. A., MCM-41 ordered mesoporous molecular sieves synthesis and characterization, Mater. Res., 2(3), 173-179 (1999).
https://dx.doi.org/10.1590/S1516-14391999000300010
Selvam, P. and Mohapatra, S. K., Thermally stable trivalent iron-substituted hexagonal mesoporous aluminophosphate (FeHMA) molecular sieves: Synthesis, characterization and catalytic properties, J. Catal., 238(1), 88-99 (2006).
https://dx.doi.org/10.1016/j.jcat.2005.12.005
Subrahmanyam, Ch., Louis, B., Rainone, F., Viswanathan, B., Renken, A. and Varadarajan, T. K., Catalytic oxidation of toluene with molecular oxygen over Cr-substituted mesoporous materials, Applied catalysis A: General, 241(1-2), 205-215 (2003).
https://dx.doi.org/10.1016/S0926-860X(02)00469-6
Tatsuo Kimura, Surfactant – template mesoporous aluminophosphate – based materials and the recent progress, Microporous Mesoporous Mater., 77:97-107 (2005).
https://dx.doi.org/10.1016/j.micromeso.2004.08.023
Vijayasankar, A. V., Mahadevaiah, N., Bhat, Y. S. and Nagaraju, N., Mesoporous aluminophosphate materials: influence of method of preparation and iron loading on textural properties and catalytic activity, J. Porous Mater., 18(3), 369-378 (2011).