Idealized P-Matrix Based Modelling and Computational Analysis of SAW Delay Lines for Improved Performance in Sensors
J. Environ. Nanotechnol., Volume 4, No 4 (2015) pp. 56-61
Abstract
The present research study describes the computational P-matrix model based modelling and subsequent analysis of the frequency response of a 300 MHz ST-X Quartz Surface Acoustic Wave (SAW) delay line device designed and fabricated with 43.5 IDT finger pairs. Employing a custom made MATLAB® algorithm, the device is modelled with a provision to vary its design parameters. Finally, a comparison of the computationally simulated frequency response with experimental device results indicates promising and good agreement between model and experiment which can be utilized and implemented during design and development stage of these devices for their potential applications in SAW Sensor systems.
Full Text
Reference
Amani, M., Chu, Y., Waterman, K. L., Hurley, C. M., Platek, M. J. and Gregory, O. J., Detection of triacetone triperoxide (TATP) using a thermodynamic based gas sensor, Sens. Actuat. B Chem., 162, 7-13(2012).
doi:10.1016/j.snb.2011.11.019
Baghai-Wadji, A. R., Selberherr, S. and Seifert, F., On the calculation of charge, electrostatic potential and capacitance in generalized finite saw structures, In: IEEE 1984 Ultrasonics Symposium, IEEE, 44-48(1984).
doi:10.1109/ULTSYM.1984.198261
Banu Priya, R., Venkatesan, T., Pandiyarajan, G. and Haresh M. Pandya, SAW devices - A comprehensive review, J. Environ. Nanotechnol., 3, 106-115(2014).
doi:10.13074/jent.2014.09.143101
Baskar Raj, V., Singh, H., Nimal, A. T., Tomar, M., Sharma, M. U. and Gupta, V., Effect of metal oxide sensing layers on the distinct detection of ammonia using surface acoustic wave(SAW) sensors, Sens. Actuat. B Chem., 187, 563-573(2013). doi:10.1016/j.snb.2013.04.063
Benetti, M., Cannata, D., Di Pietrantonio, F., Marchiori, C., Persichetti, P. and Verona, E., Pressure sensor based on surface acoustic wave resonators, In: 2008 IEEE Sensors, IEEE, 1024-1027(2008).
doi:10.1109/ICSENS.2008.4716617
Brown, R. B., Horine, B. H. and Hines, J. H., Practical implementation of coupling-of-modes theory for SAW device modeling, In: Proceedings., IEEE Ultrasonics Symposium, IEEE, 153-158(1989).
doi:10.1109/ULTSYM.1989.66975
Campbell, C. K., Applications of surface acoustic and shallow bulk acoustic wave devices, Proceedings of the IEEE, IEEE, 77, 1453-1484(1989).
doi:10.1109/5.40664
Chu, Y., Mallin, D., Amani, M. and Gregory, O. J., Detection of explosives using orthogonal gas sensors, In: 2013 IEEE Sensors, IEEE, 1-4(2013).
doi:10.1109/ICSENS.2013.6688125
Filipiak, J., Solarz, L. and Steczko, G., Surface acoustic wave stress sensors -Designing, Mol. Quant. Acoust., 28, 71-80(2007).
Guerra-Pulido, J. O. and Pérez-Alcázar, P. R., Generalised relations between P- and Y-matrices and their applications, J. Eng., 1-8(2014).
doi:10.1049/joe.2014.0215
Haresh M. Pandya, Nimal, A. T., Sharma, M., Gopalakrishnan, P., Mittal, U. and Elango, P., Equivalent circuit MATLAB modelling of a surface acoustic wave( SAW ) delay line for sensor applications, IISM-2010, 1-6(2010).
Haresh M. Pandya, Sharma, M. U., Nimal, A. T. and Rajesh, K. B., Impulse modelled response of a 300 mhz st-quartz SAW device for sensor specific applications, J. Environ. Nanotechnol., 2, 15-21(2013).
doi:10.13074/jent.2013.02.nciset33
Hartmann, C. S. and Abbott, B. P., A generalized impulse response model for SAW transducers including effects of electrode reflections, In: IEEE 1988 Ultrasonics Symposium Proceedings, IEEE, 29-34(1988).
doi:10.1109/ULTSYM.1988.49337
Hempel, J., Wilde, J. and Reindl, L. M., Effects of residual stress on assembled saw strain sensors, PIERS, 286-290(2013).
HribsÌŒek, M. F., Tosic, D. V., TasicÌ, M., FilipovicÌ, Z. and ZÌŒivkovicÌ, Z., Design and realization of transversal surface acoustic wave RF filters, In: 5th European Conference on Circuits and Systems for Communications (ECCSC), IEEE, 82-85(2010).
Malocha, D., Gallagher, M., Fisher, B., Humphries, J., Gallagher, D. and Kozlovski, N., A passive wireless Multi-Sensor SAW technology device and system perspectives, Sens., 13, 5897-5922(2013).
doi:10.3390/s130505897
Manner, O., Wagner, K. C. and Ruppel, C. C. W., Advanced numerical methods for the simulation of SAW devices, IEEE Ultrasonics Symposium Proceedings, IEEE, 123-130(1996).
doi:10.1109/ULTSYM.1996.583820
Pastureaud, T., Evaluation of the P-matrix parameters frequency variation using periodic FEM/BEM analysis, Ultrasonics Symposium, IEEE, 1, 80-84(2004).
doi:10.1109/ULTSYM.2004.1417673
Ruppel, C. C. W., Ruile, W., Scholl, G. and Wagner, K. C., Review of models for low-loss filter design and applications, Proceedings of IEEE Ultrasonics Symposium, IEEE, 1, 313-324(1994).
doi:10.1109/ULTSYM.1994.401602
Rusakov, A. N., Orlov, V. S., Chao, B. and Lee, V., Application of modified P-matrix model to the simulation of radio frequency LSAW filters, In: 2001 IEEE Ultrasonics Symposium, Proceedings, IEEE, 7-11(2001).
doi:10.1109/ ULTSYM. 2001.991567
Sharma, M. U., Kumar, D., Koul, S. K., Venkatesan, T., Pandiyarajan, G., Nimal, A. T., Kumar, P. R. and Haresh M. Pandya, Modelling of SAW devices for gas sensing applications -A comparison, J. Environ. Nanotechnol., 3, 63-66(2014).
doi:10.13074/jent.2014.12.144110
Smith, W. R., Gerard, H. M. and Jones, W. R., Analysis and design of dispersive interdigital surface-wave transducers, IEEE Trans. Microw. Theory Tech., 20, 458-471(1972).
doi:10.1109/TMTT.1972.1127786
Tancrell, R. H. and Holland, M. G., Acoustic surface wave filters, Proceedings of the IEEE, IEEE, 59, 393-409(1971).
doi:10.1109/PROC.1971.8180
Tancrell, R. H., Schulz, M. B., Barrett, H. H., Davis, L. and Holland, M. G., Dispersive delay lines using ultrasonic surface waves, Proceedings of the IEEE, IEEE, 57, 1211-1213(1969).
doi:10.1109/PROC.1969.7202
Tobolka, G., Mixed Matrix Representation of SAW transducers, IEEE Transactions on Sonics and Ultrasonics, IEEE, 26, 426-427(1979).
doi:10.1109/T-SU.1979.31128
Venkatesan, T. and Haresh M. Pandya, Surface acoustic wave devices and sensors -A short review on design and modelling by impulse response, J. Environ. Nanotechnol., 2, 81-89(2013).
doi:10.13074/jent.2013.09.132034
Ventura, P., Solal, M., Dufilie, P., Desbois, J., Doisy, M. and Hode, J. M., Synthesis of SPUDT filters with simultaneous reflection and transduction optimization, In: IEEE 1992 Ultrasonics Symposium Proceedings, IEEE, 71-75(1992).
doi:10.1109/ULTSYM.1992.276061