Thermophysical and Tribological Analysis of Non-edible Coconut Oil with CuO Nanoparticles
J. Environ. Nanotechnol., Volume 15, No 2 (June 2026) pp. 267-272
Abstract
The study investigates the thermophysical and tribological behavior of non-edible coconut oil when used as a base fluid with copper oxide (CuO) nanoparticles. The measured thermophysical properties include kinematic and dynamic viscosities, acid value, flash point, fire point, and transesterification characteristics. Tribological performance was evaluated using a pin-on-disc tribometer (ASTM G99) to determine the coefficient of friction and wear rate. Results show that the addition of CuO nanoparticles increases viscosity and improves load-carrying capacity. The underlying mechanisms are discussed, and guidance on the optimal concentrations of vegetable oil-based nano-lubricants is provided. The results indicate that the optimal concentration of CuO nanoparticle-based nano-lubricant is around 0.38 wt.%, at which the coefficient of friction and wear rate are minimized. The addition of nanoparticles can improve the overall lubricating properties of the oil, making it suitable for lubrication applications. The addition of CuO nanoparticles to the base oil increases the viscosity by 30–32%, while the decrease in viscosity at elevated temperatures becomes less pronounced with increasing nanoparticle concentration. The average wear rate is reduced by approximately 65–70% compared with that of the base oil alone. At the optimum CuO nanoparticle concentration of 0.38 wt.%, the wear rate is reduced by 72% compared with that of the base oil.
Full Text
Reference
Abd Elhaseeb, D. M., Ali, M. K. A., Ezzat, M. F. and Mourad, M., A review of the tribological properties of nanoparticles dispersed in bio-lubricants, Proce. Institut. Mech. Eng., Part J J. Eng. Tribol., 237(1), 27-52(2023).
https://doi.org/10.1177/13506501221108125
Aldana, P. U., Dassenoy, F., Vacher, B., Le Mogne, T. and Thiebaut, B., WS2 nanoparticles anti-wear and friction reducing properties on rough surfaces in the presence of ZDDP additive, Tribol. Int., 102, 213-221(2016).
https://doi.org/10.1016/j.triboint.2016.05.042
Cortes, V. and Ortega, J. A., Evaluating the rheological and tribological behaviors of coconut oil modified with nanoparticles as lubricant additives, Lubricants, 7(9), 76(2019).
https://doi.org/10.3390/lubricants7090076
Gao, X., Wang, Y., Wang, T., Li, F., Wang, Y. and Zhang, X., Comparative study on preparation of hybrid WS2@ GO composites and its tribological application in paraffin liquid, Indus. Lubricat. Tribol., 77(3), 361-369(2025).
https://doi.org/10.1108/ILT-10-2024-0397
Garcia, T. M., Contreras, U. R. W., Jimenez, C. B. and Guillen, M. J., Nanotechnology in lubricants: a systematic review of the use of nanoparticles to reduce the friction coefficient, Lubricants, 12(5), 166(2024).
https://doi.org/10.3390/lubricants12050166
Greenberg, R., Halperin, G., Etsion, I. and Tenne, R., The effect of WS2 nanoparticles on friction reduction in various lubrication regimes, Tribol. Lett., 17(2), 179-186(2004).
https://doi.org/10.1023/B:TRIL.0000032443.95697.1d
Gupta, H., Rai, S. K., Satya Krishna, N. and Anand, G., The effect of copper oxide nanoparticle additives on the rheological and tribological properties of engine oil, J. Dispers. Sci. Technol., 42(4), 622-632(2021).
https://doi.org/10.1080/01932691.2020.1844017
Jhodkar, D. and Gupta, K., Effect of cuo nanoparticles-based vegetable oil on the machining performance of wc tool insert while turning EN 8 steel, Proce. Int. Conf. Indus. Eng. Operat. Manage., 14, 3229-3235(2020).
Khan, M. S., Sisodia, M. S., Gupta, S., Feroskhan, M., Kannan, S. and Krishnasamy, K., Measurement of tribological properties of Cu and Ag blended coconut oil nanofluids for metal cutting, Eng. Sci. Technol. Int. J., 22(6), 1187-1192(2019).
https://doi.org/10.1016/j.jestch.2019.04.005
Kumar, S. and Kumar, R., Tribological characteristics of synthesized hybrid nanofluid composed of CuO and TiO2 nanoparticle additives, Wear, 518, 204623(2023).
https://doi.org/10.1016/j.wear.2023.204623
Rashin, M. N. and Hemalatha, J., Viscosity studies on novel copper oxide–coconut oil nanofluid, Exp. Therm. Flu. Sci., 48, 67-72(2013).
https://doi.org/10.1016/j.expthermflusci.2013.02.009
Rosli, M. F., Tribological Performance of Palm Oil-Based Lubricant with Nanoparticles Additive, TJ mech. Eng. Mach., (2019).
http://studentsrepo.um.edu.my/11303/8/faizal.pdf
Uniyal, P., Gaur, P., Yadav, J., Khan, T. and Ahmed, O. S., A review on the effect of metal oxide nanoparticles on tribological properties of biolubricants, Acs Omega, 9(11), 12436-12456(2024).
https://doi.org/10.1021/acsomega.3c08279
Yang, S., Recovery, physicochemical characterization and thermal properties of lipids from R. opacus PD630 (Doctoral dissertation, University of Otago), (2014).
