Sustainable Ni–Al₂O₃ Nanocomposite Surface Coatings on Stainless Steel 304 for High-performance Environmental Applications
J. Environ. Nanotechnol., Volume 14, No 4 (December 2025) pp. 428-436
Abstract
High-technology production and green material design that upgrade the surface functionality of engineering alloys are crucial for enhancing durability, energy efficiency, and long-term sustainability. Stainless steel 304 (SS304), widely used in automotive, aerospace, and marine applications, is often subjected to corrosion, wear, and mechanical degradation under severe service conditions. This study reports the development of a Ni–Al₂O₃ nanocomposite coating on SS304 using an optimized Watts bath electrodeposition process designed to achieve high-performance and sustainable surface protection. A nickel matrix reinforced with varying concentrations of nano-sized Al₂O₃ particles was employed to improve interfacial bonding, tribological hardness, and environmental stability. Key process parameters, including current density, agitation speed, deposition time, and bath composition, were systematically optimized to ensure uniform nanoparticle dispersion and the formation of defect-free coatings. Surface morphology and coating integrity were analyzed using scanning electron microscopy (SEM), while mechanical performance was evaluated through Vickers microhardness testing and pin-on-disc wear analysis. The results indicate a significant enhancement in surface hardness (by ~30–40%) and a substantial reduction in wear loss with increasing Al₂O₃ nanoparticle content, attributed to grain refinement and effective nanoparticle reinforcement. The novelty of this work lies in the combined optimization of electrodeposition parameters and nanoparticle loading to achieve a uniformly reinforced Ni–Al₂O₃ coating with superior mechanical performance using a sustainable processing route. The developed nanocomposite coating demonstrates excellent hardness, wear resistance, and extended service life, making it a promising surface engineering solution for next-generation, low-maintenance industrial applications requiring durable and environmentally responsible protective coatings.
Full Text
Reference
Alizadeh, M. and Cheshmpish, A., Electrodeposition of Ni–Mo/Al₂O₃ nano-composite coatings at various deposition current densities, Appl. Surf. Sci., 469, 762–772 (2019).
https://doi.org/10.1016/j.apsusc.2018.10.073
Alizadeh, M. and Safaei, H., Characterization of Ni–Cu matrix, Al₂O₃ reinforced nano-composite coatings prepared by electrodeposition, Appl. Surf. Sci., 455, 667–676 (2018).
https://doi.org/10.1016/j.apsusc.2018.06.095
Dehgahi, S., Amini, R. and Alizadeh, M., Corrosion, passivation and wear behaviors of electrodeposited Ni–Al₂O₃–SiC nano-composite coatings, Surf. Coat. Technol., 304, 502–511 (2016).
https://doi.org/10.1016/j.surfcoat.2016.07.007
Farris, S., Unalan, I. U., Introzzi, L.,Fuentes-Alventosa, J. M. and Cozzolino, C., Pullulan-based films and coatings for food packaging: Present applications, emerging opportunities, and future challenges, J. Appl. Polym. Sci., 131, 40539 (2014).
https://doi.org/10.1002/app.40539
Ma, L., Nuwayhid, R. B., Wu, T., Lei, Y., Amine, K.and Lu, J., Atomic layer deposition for lithium-based batteries, Adv. Mater. Interfaces, 3, 1600564 (2016).
https://doi.org/10.1002/admi.201600564
Najafi, M., Khoshakhlagh, F., Zamanzadeh, S. M., Shirazi, M., Samadi, M. and Hajikhani, S., Characteristics of TSP loads during the Middle East Springtime Dust Storm (MESDS) in western Iran, Arab. J. Geosci., 7, 5367–5381 (2014).
https://doi.org/10.1007/s12517-013-1086-z
Rehman, M. A. U., Munawar, M. A., Schubert, D. and Boccaccini, A., Electrophoretic deposition of chitosan/gelatin/bioactive glass composite coatings on 316L stainless steel: A design of experiment study, Surf. Coat. Technol., 357, 487–496 (2019).
https://doi.org/10.1016/j.surfcoat.2018.12.013
Serrano-Luján, L., Víctor-Román, S., Toledo, C., Sanahuja-Parejo, O., Mansour, A., Abad, J., Amassian, A., Benito, A. M., Maser, W. and Urbina, A., Environmental impact of the production of graphene oxide and reduced graphene oxide, SN Appl. Sci., 1, 193 (2019).
https://doi.org/10.1007/s42452-019-0193-1
Sivaraman, P. and Santhosh, S., Optimizing Sustainable Material Selection for Air Conditioners in a Supply Chain, Mater. Technol., 57(6), 571-579(2023).
https://doi.org/10.17222/mit.2023.940
Sun, Z., Li, M. and Zhou, Y., Recent progress on synthesis, multi-scale structure, and properties of Y–Si–O oxides, Int. Mater. Rev., 59, 357–383 (2014).
https://doi.org/10.1179/1743280414Y.0000000033
Vafa, E., Bazargan-lari, R. and Bahrololoom, M., Electrophoretic deposition of polyvinyl alcohol/natural chitosan/bioactive glass composite coatings on 316L stainless steel for biomedical application, Prog. Org. Coat., 151, 106059 (2021).
https://doi.org/10.1016/j.porgcoat.2020.106059
Wang, S., Ma, C. and Walsh, F. C., Alternative tribological coatings to electrodeposited hard chromium: A critical review, Trans. IMF, 98, 173–185 (2020).
https://doi.org/10.1080/00202967.2020.1776962
Wang, Y., Tay, S., Wei, S., Xiong, C., Gao, W., Shakoor, R. and Kahraman, R., Microstructure and properties of sol-enhanced Ni–Co–TiO₂ nano-composite coatings on mild steel, J. Alloys Compd., 649, 222–228 (2015).
https://doi.org/10.1016/j.jallcom.2015.07.147
Wu, C. L., Xu, T., Wang, Z. Y., Zhang, C. H., Zhang, S., Ni, C. and Zhang, D. X., Laser surface alloying of FeCoCrAlNiTi high entropy alloy composite coatings reinforced with TiC on 304 stainless steel to enhance wear behavior, Ceram. Int., (2022).
https://doi.org/10.1016/j.ceramint.2022.04.049
Wu, C., Zhang, S., Zhang, C., Zhang, H.and Dong, S., Phase evolution and cavitation erosion–corrosion behavior of FeCoCrAlNiTiₓ high entropy alloy coatings on 304 stainless steels by laser surface alloying, J. Alloys Compd., 698, 761–770 (2017).
