Experimental Investigation of the Behavior of Hybrid Natural Fiber-reinforced, Nano-filled HDPE Composites for Lightweight Automotive Components
J. Environ. Nanotechnol., Volume 14, No 4 (December 2025) pp. 380-388
Abstract
Due to the increasing demand for sustainable and lightweight materials in the automotive sector, there has been a renewed interest in natural fiber-reinforced polymer composites. In this work, the mechanical behaviour of hybrid composites composed of banana, kenaf, and coir fibers reinforced with high-density polyethylene (HDPE) containing nano-fillers is examined. The composite was prepared with 70% epoxy resin. The contents of fibers and HDPE were varied in three different proportions: (1) 10% banana, 10% kenaf, 5% coir and 5% HDPE; (2) 7.5% banana, 10% kenaf, 7.5% coir and 5% HDPE; and (3) 7.5% banana, 7.5% kenaf, 10% coir and 5% HDPE. Nanoparticles were incorporated into the HDPE matrix to enhance the mechanical and physical characteristics of the composites. Experimental results showed that compositions with higher banana and kenaf fiber contents exhibited improved tensile strength, compressive strength, and impact resistance. Conversely, formulations containing a higher coir fiber content exhibited enhanced flexural strength, hardness, and water absorption performance. Scanning electron microscopy (SEM) analysis of fracture surfaces provided insights into fiber–matrix adhesion and fracture mechanism. Overall, the incorporation of nano-fillers significantly improved the behaviour of hybrid natural fiber/HDPE composites, making them suitable for lightweight and eco-friendly automotive components. These enhanced mechanical properties demonstrate the strong potential of the developed hybrid nano-filled composites for lightweight automotive components, contributing to vehicle weight reduction, improved fuel efficiency, and lower emissions.
Full Text
Reference
Al-Oqla, F. and Sapuan, S., Natural fiber reinforced polymer composites in industrial applications: Feasibility of date palm fibers for sustainable automotive industry, J. Clean. Prod., 66, 347–354(2014).
https://doi.org/10.1016/j.jclepro.2013.10.050
Al-Oqla, F., Sapuan, S. M., Ishak, M. R. and Nuraini, A., A decision-making model for selecting the most appropriate natural fiber–polypropylene-based composites for automotive applications, J. Compos. Mater., 50(4), 543–556(2016).
https://doi.org/10.1177/0021998315577233
Athith, D., Sanjay, M., Gowda, T. Y. Y., Madhu, P., Arpitha, G., Yogesha, B. and Omri, M. A., Effect of tungsten carbide on mechanical and tribological properties of jute/sisal/E-glass fabrics reinforced natural rubber/epoxy composites, J. Indus. Tex., 48(4), 713–737(2018).
https://doi.org/10.1177/1528083717740765
Boland, C., Kleine, R., Keoleian, G., Lee, E., Kim, H. C. and Wallington, T., Life cycle impacts of natural fiber composites for automotive applications: Effects of renewable energy content and lightweighting, J. Ind. Eco., 20(1), 179–189(2016).
https://doi.org/10.1111/jiec.12286
Czerwinski, F., Current trends in automotive lightweighting strategies and materials. Materials, 14(21), 6631(2021).
https://doi.org/10.3390/ma14216631
Hanan, F., Jawaid, M. and Tahir, P. M., Mechanical performance of oil palm/kenaf fiber-reinforced epoxy-based bilayer hybrid composites, J. Nat. Fib., 17(2), 155–167(2020).
https://doi.org/10.1080/15440478.2018.1477083
Karthick, M., Meikandan, M., Kaliappan, S.,Karthick, M., Sekar, S., Patil, P. P., Raja, S., Natrayan, L. and Paramasivam, P., Experimental investigation on mechanical properties of glass fiber hybridized natural fiber reinforced penta-layered hybrid polymer composite, Int. J. Chem. Eng., 2022(1), 1864446(2022).
https://doi.org/10.1155/2022/1864446
Marichelvam, M. K., Manimaran, P., Verma, A.,Sanjay, M., Siengchin, S., Kandakodeeswaran, K. and Geetha, M., A novel palm sheath and sugarcane bagasse fiber based hybrid composites for automotive applications: An experimental approach, Polym. Compos.,42(1), 512-521(2020).
https://doi.org/10.1002/pc.25843
Meng, F., McKechnie, J., Turner, T., Wong, K.and Pickering, S., Environmental aspects of use of recycled carbon fiber composites in automotive applications, Environ. Sci. Technol., 51(21), 12727–12736(2017).
https://doi.org/10.1021/acs.est.7b04069
Mochane, M., Mokhena, T. C., Mokhothu, T. H.,Mtibe, A., Sadiku, E., Ray, S., Ibrahim, I. and Daramola, O., Recent progress on natural fiber hybrid composites for advanced applications: A review, Exp. Polym. Lett., 13(2), 159–198(2019).
https://doi.org/10.3144/expresspolymlett.2019.15
Naskar, A., Keum, J. and Boeman, R., Polymer matrix nanocomposites for automotive structural components, Nat. Nanotechnol., 11(12), 1026–1030(2016).
https://doi.org/10.1038/nnano.2016.262
Nurazzi, N. M., Asyraf, M., Athiyah, S. F.,Shazleen, S. S., Rafiqah, S., Harussani, M. M., Kamarudin, S. H., Razman, M., Rahmah, M., Zainudin, E. S., Ilyas, R., Aisyah, H. A.,Norrrahim, M., Abdullah, N., Sapuan, S. M. and Khalina, A., A review on mechanical performance of hybrid natural fiber polymer composites for structural applications, Polym., 13(13), 2170(2021).
https://doi.org/10.3390/polym13132170
Omiyale, B. O., Olugbade, T., Abioye, T.and Farayibi, P., Wire arc additive manufacturing of aluminium alloys for aerospace and automotive applications: A review, Mater. Sci. Technol., 38(7), 391–408(2022).
https://doi.org/10.1080/02670836.2022.2045549
Palanikumar, K., Ramesh, M. and Reddy, K., Experimental investigation on the mechanical properties of green hybrid sisal and glass fiber reinforced polymer composites, J. Nat Fib., 13(3), 321–331(2016).
https://doi.org/10.1080/15440478.2015.1029192
Rosenthal, S., Maaß, F., Kamaliev, M., Hahn, M.,Gies, S. and Tekkaya, A., Lightweight in automotive components by forming technology, Automot. Innovation, 3(2), 195–209(2020).
https://doi.org/10.1007/s42154-020-00103-3
Saba, N., Tahir, P. and Jawaid, M., A review on potentiality of nano filler/natural fiber filled polymer hybrid composites, Polym., 6(8), 2247–2273(2014).
https://doi.org/10.3390/polym6082247
Suriani, M., Ilyas, R. A., Zuhri, M. Y. M., Khalina, A., Sultan, M. T. H., Sapuan, S. M., Ruzaidi, C. M., Wan, F. W., Zulkifli, F. H., Harussani, M. M., Azman, M. A. M., Radzi, F. M. and Sharma, S., Critical review of natural fiber reinforced hybrid composites: Processing, properties, applications and cost, Polym., 13(20), 3514(2021).
https://doi.org/10.3390/polym13203514
Tang, Y., Su, D., Huang, X., Alva, G., Liu, L. and Fang, G., Synthesis and thermal properties of the MA/HDPE composites with nano-additives as form-stable PCM with improved thermal conductivity, Appl. Energy, 180, 116–129(2016).
https://doi.org/10.1016/j.apenergy.2016.07.106
Zhang, C., Chi, Q., Dong, J., Cui, Y., Wang, X., Liu, L. and Lei, Q., Enhanced dielectric properties of poly(vinylidene fluoride) composites filled with nano iron oxide-deposited barium titanate hybrid particles, Sci. Rep., 6, 33508(2016).
https://doi.org/10.1038/srep33508
Zhang, S., Cao, X., Ma, Y., Ke, Y., Zhang, J. and Wang, F., The effects of particle size and content on the thermal conductivity and mechanical properties of Al₂O₃/high density polyethylene (HDPE) composites, Exp. Polym. Lett., 5(7), 581–590(2011).
