Influence of Saltwater and Distilled Water on the Mechanical Properties of Natural Fiber–reinforced Polyester Composites Enhanced with SiC Nanoparticles
J. Environ. Nanotechnol., Volume 14, No 3 (September 2025) pp. 692-704
Abstract
This study examines the mechanics of polyester composites reinforced with Cyperus and Calotropis gigantea fibers, together with their moisture absorption characteristics. The ability of distilled water and salt water to absorb moisture was studied. The subsequent composites undergo tensile and flexural testing: one reinforced with pure calotropis gigantea fiber, one with pure cyperus fiber, and one with a hybrid of both fibers. The examination examines the alterations in mechanical properties resulting from varying moisture conditions. The impact of silicon carbide (SiC) nanoparticles on these composites is also assessed. The results indicate that SiC nanoparticles enhance the mechanical properties, particularly in damp conditions. Examining fracture behavior facilitates the understanding of the interactions of natural fibers, the matrix, and nano-reinforcement. The CF composite exhibits a moisture absorption of 8.19% in distilled water and 9.50% in saltwater at a maximum natural fiber weight fraction of 40%, while the CGF composite demonstrates maximum absorptions of 6.57% and 8.26%, respectively. Comparable conditions produce outcomes of 4.19% and 6.54% for the hybrid composite. The incorporation of silicon carbide into the polymer matrix significantly diminishes the moisture absorption capacity of the cyperus composite to 35.2% for distilled water and 31.7% for saltwater, in contrast to the cyperus fiber-reinforced composite. Overall, the study demonstrates that SiC nanoparticles effectively mitigate moisture-induced degradation in natural fiber composites, making them promising candidates for outdoor, marine, and structural applications.
Full Text
Reference
Aruna, M., Hossain, I., Karthigairajan, M., Venkatesh, R., Prabhu, P., Obaid, S. A., Alharbi, S. A. and Kaliappan, S., Treated sisal fiber made epoxy composite hybridize with silicon carbide nanoparticles: Characteristics study, J. Polym. Res., 31(7), 191(2024).
https://doi.org/10.1007/s10965-024-04012-5
Babu, L. G., Influence of benzoyl chloride treatment on the tribological characteristics of Cyperus pangorei fibers based non-asbestos brake friction composites, Mater. Res. Express., 7(1), 015303(2020).
https://doi.org/10.1088/2053-1591/ab54f1
Balaji, V. and Goud, G., Mechanical properties of Roystonea regia – Glass/epoxy composites with SiC particles, Mater. Today Proc., 54, 527–530(2022).
https://doi.org/10.1016/j.matpr.2021.12.144
Bhunia, A. K., Mondal, D., Sahu, K. R. and Mondal, A. K., Characterization of new natural cellulosic fibers from Cyperus compactus Retz. (Cyperaceae) Plant, Carbohydr. Polym. Technol. Appl., 5, 100286(2023).
https://doi.org/10.1016/j.carpta.2023.100286
Jeyapragash, R., Sathiyamurthy, S., Srinivasan, V., Prithivirajan, R. and Swaminathan, G., Properties And Characteristics Of Alkali Treated Calotropis Gigantea Fiber-Reinforced Particle-Filled Epoxy Composites, Compos. Theory Pract., 2022(2), 99–105(2022).
KG, A., GK, S. K., Kalaichelvan, K., Damodaran, A. and Chidambaranathan, B., Calotropis gigantea stem fiber reinforced thermoset plastics: Interlaminar shear strength and related tribo-mechanical properties, Proc. Inst. Mech. Eng., Part L: J. Mater.: Des. Appl., 237(4), 886–905(2023).
https://doi.org/10.1177/14644207221129292
Kumar, K. P., Lokeshwar, G., Reddy, C. U. K., Shetty, N., Shahabaz, S. M. and Nargis, T., Experimental investigation of mechanical properties and morphology of ramie, bamboo, and ramie-bamboo hybrid composites with silicon carbide and alumina nano-fillers, Mater. Res. Express., 12(2), 025306(2025a).
https://doi.org/10.1088/2053-1591/adb2e3
Kumar, M. S., Yang, C. H., Pulikkalparambil, H., Edoziuno, F. O., Romanovski, V. and Salah, B., Improving Thermal Stability and Dynamic Mechanical Properties of Eco-Friendly Bamboo Fiber-Reinforced Epoxy Composites with SiC Particle Integration, Fibers Polym., 26(7), 3109–3121(2025b).
https://doi.org/10.1007/s12221-025-00990-5
Marappan, M., Prabhakaran, K., Ravichandran, D. and Muruganantham, S., Mechanical Properties and Characterization of Hybrid Polyester Composites Reinforced with Alkali-Treated Kenaf, Silicon Carbide, and Bamboo Fibers for a Variety of Applications, Malays. J. Chem., 27(3), 417–426(2025).
https://doi.org/10.55373/mjchem.v27i3.417
Mohanavel, V., Raja, T., Yadav, A., Ravichandran, M., & Winczek, J., Evaluation of Mechanical and Thermal Properties of Jute and Ramie Reinforced Epoxy-based Hybrid Composites, J. Nat. Fib., 19(14), 8022–8032(2022).
https://doi.org/10.1080/15440478.2021.1958432
Mohit, H., Sanjay, M. R., Siengchin, S., Kanaan, B., Ali, V., Alarifi, I. M. and Bagory, T. M. A. A. E., Predicting physico-mechanical and thermal properties of loofa cylindrica fibers and Al2O3/Al-SiC reinforced polymer hybrid composites using artificial neural network techniques, Constr. Build. Mater., 409, 133901(2023).
https://doi.org/10.1016/j.conbuildmat.2023.133901
Neuba, L. D. M., Junio, R. F. P., Souza, A. T., Carvalho, M. T., Ribeiro, M. E. A., Lazarus, B. S., Pereira, A. C. and Monteiro, S. N., Dynamic mechanical and thermal mechanical analysis of Cyperus malaccensis sedge fiber reinforced GO-incorporated epoxy nanocomposites: a short communication, J. Mater. Res. Technol., 24, 1653–1662(2023a).
https://doi.org/10.1016/j.jmrt.2023.03.075
Neuba, L. D. M., Junio, R. F. P., Souza, A. T., Chaves, Y. S., Tavares, S., Palmeira, A. A., Monteiro, S. N. and Pereira, A. C., Alkaline Treatment Investigation for Sedge Fibers (Cyperus malaccensis): A Promising Enhancement, Polym., 15(9), 2153(2023b).
https://doi.org/10.3390/polym15092153
Neuba, L. D. M., Junio, R. P. F., Ribeiro, M. P., Souza, A. T., Lima, E. S., Filho, F. C. G., Figueiredo, A. B. H. S., Braga, F. O., de Azevedo, A. R. G. and Monteiro, S. N., Promising mechanical, thermal, and ballistic properties of novel epoxy composites reinforced with Cyperus malaccensis sedge fiber, Polym., 12(8), 1776(2020).
https://doi.org/10.3390/polym12081776
Neuba, L. D. M., Silva, T. T., Reis, L. M., Monteiro, S. N., Simonassi, N. T., Candido, L. C. and Pereira, A. C., Mechanical properties of sedge fiber-reinforced epoxy composites incorporated with graphene oxide, J. Mater. Res. Technol., 34, 1424–1435(2025).
https://doi.org/10.1016/j.jmrt.2024.12.136
Pandi, G. J., Raja, K., Vijayan, V. and Sudhagar, S., Investigation on the mechanical, water absorption, and tribological performance of calotropis gigantea and abaca fiber reinforced epoxy composites, J. Polym. Res., 31(10), 308(2024).
https://doi.org/10.1007/s10965-024-04157-3
Pithalis, N. E. G., Raj, J. B. and Sathish, S., Tensile and Flexural Behaviour of Basalt Composites with Silicon Carbide Fillers, Silicon., 14(4), 1559–1569(2022).
https://doi.org/10.1007/s12633-021-00978-9
Rajini, N., Mayandi, K., Prabhakar, M. M., Siengchin, S., Ayrilmis, N., Bennet, C. and Ismail, S. O., Tribological Properties of Cyperus Pangorei Fibre Reinforced Polyester Composites (Friction and Wear Behaviour of Cyperus Pangorei Fibre/Polyester Composites), J. Nat. Fib., 18(2), 261–273(2021).
https://doi.org/10.1080/15440478.2019.1621232
Ramesh, G., Subramanian, K., Sathiyamurthy, S. and Jayabal, S., Study on influence of fiber length and fiber weight proportion in mechanical behavior of Calotropis gigantea fiber-epoxy composites, Polym. Compos., 41(11), 4899–4906(2020).
https://doi.org/10.1002/pc.25761
Ramesh, G., Subramanian, K., Sathiyamurthy, S. and Prakash, M., Calotropis Gigantea Fiber-epoxy Composites: Influence of Fiber Orientation on Mechanical Properties and Thermal Behavior, J. Nat. Fibers., 19(10), 3668–3680(2022).
https://doi.org/10.1080/15440478.2020.1848718
Saravana K. M., Pulikkalparambil, H., Ishfaq, K., Ramasamy, S., Romanovski, V. and Salah, B., Elevating green materials sustainability through the integration of ceramic particles, Polym. Compos., 29894(2025).
https://doi.org/10.1002/pc.29894
Sekar, S., Kumar, S. S., Vigneshwaran, S. and Velmurugan, G., Evaluation of Mechanical and Water Absorption Behavior of Natural Fiber-Reinforced Hybrid Biocomposites, J. Nat. Fibers., 19(5), 1772-1782(2020).
https://doi.org/10.1080/15440478.2020.1788487
Sheferaw, L., Gideon, R. K., Ejegu, H. and Gatew, Y., Extraction and Characterization of Fiber from the Stem of Cyperus Papyrus Plant, J. Nat. Fibers., 20(1), 2149661(2023).
https://doi.org/10.1080/15440478.2022.2149661
Sudhakar, S., Santhanam, N., Sarojini, S. and Rajendran, S., Mechanical, Thermal, Dielectric and Water Absorption Analysis of Eco-Friendly FRP Rebar for Structural Applications, Trans. Electr. Electron. Mater., 26(4), 560–572(2025).
https://doi.org/10.1007/s42341-025-00611-1
Thooyavan, Y., Kumaraswamidhas, L. A., Raj, R. E., Binoj, J. S. and Mansingh, B. B., Failure analysis of basalt bidirectional mat reinforced micro/nano Sic particle filled vinyl ester polymer composites, Eng. Fail. Anal., 136, 106227(2022).
https://doi.org/10.1016/j.engfailanal.2022.106227
Vedanarayanan, V., Kumar, B. S. P., Karuna, M. S., Jayanthi, A., Kumar, K. V. P., Radha, A., Ramkumar, G. and Christopher, D., Experimental Investigation on Mechanical Behaviour of Kevlar and Ramie Fibre Reinforced Epoxy Composites, J. Nanomater., 2022(1), 8802222(2022).
https://doi.org/10.1155/2022/8802222
Velmurugan, G., Kumar, S. S., Chohan, J. S., Sathish, R., Selvan, S. P., Abraar, S. A. M., Raja, D. E., Nagaraj, M. and Palani, S., Hybrid calotropis gigantea fibre-reinforced epoxy composites with SiO2’s longer-term moisture absorbable and its impacts on mechanical and dynamic mechanical properties, Mater. Res. Express., 10(11), 115302(2023).
https://doi.org/10.1088/2053-1591/ad0bc8
Velusamy, K., Navaneethakrishnan, P., Rajeshkumar, G. and Sathishkumar, T. P., The influence of fiber content and length on mechanical and water absorption properties of Calotropis Gigantea fiber reinforced epoxy composites, J. Ind. Text., 48(8), 1274–1290(2019).
https://doi.org/10.1177/1528083718763778
Venkatesh, R., Das, A. D., Kamatchi, R. M., Kaliyaperumal, G., Ajin, M. and Shanmugam, R., Synthesis and Functional Behavior of Sisal Fiber-Incorporated Epoxy Hybrid Nanocomposite Enriched by Nano-SiC, J. Inst. Eng. India Ser. D., (2024).
https://doi.org/10.1007/s40033-024-00683-y
Zaman, H. U. and Khan, R. A., Preparation and Testing of Bast Fiber Reinforced Thermoplastic Composites under Chemical Treatment, Int. J. Adv. Sci. Eng., 10(1), 3164–3177(2023).
https://doi.org/10.29294/IJASE.10.1.2023.3164-3177
Zaman, H. U. and Khan, R. A., Surface Modified Calotropis Gigantea Fiber Reinforced Polypropylene Composites, Int. J. Adv. Sci. Eng., 9(1), 2477–2487(2022).
