Development and Performance Evaluation of Flax–areca Hybrid Epoxy Composites with Zirconium Oxide for Lightweight Structures
J. Environ. Nanotechnol., Volume 14, No 4 (December 2025) pp. 389-400
Abstract
Natural fiber hybrid composites incorporating flax fibers and additives have emerged as promising materials for lightweight structural applications. This study focuses on the development, characterization, and evaluation of epoxy composites incorporating flax fiber (FF) and areca fiber (AF), both with and without zirconium oxide (ZrO₂) nanoparticles. Hybrid composites (comprising 50 wt.% fibers in a 1:1 ratio) and single-fiber-reinforced composites (containing 50 wt.% fibers) were fabricated using a compression molding process. The composites contained 5–10 wt.% of additives. The X-ray diffraction (XRD) spectrum revealed the crystallinity index and crystallite size of all the composites. The crystal structure exhibited monoclinic symmetry, and the surfaces of both the fibers and fillers were irregular. Fourier-transform infrared (FTIR) spectroscopy was used to determine the chemical composition of the composites. Subsequently, the mechanical and thermal properties of the hybrid composites were evaluated. The results indicated that the concentration of ZrO₂ nanoparticles significantly influenced the tensile, flexural, and impact strengths of the composites. Notably, the hybrid composite with 7.5 wt.% filler exhibited a tensile strength of 105 MPa, a flexural strength of 690 MPa, an interlaminar stress of 255.1 MPa, and an impact energy of 4.82 J/m². Thermal analysis revealed that incorporating up to 7.5 wt.% filler improved composite stability by acting as a barrier to degradation. These findings indicate the potential application of the developed composites in lightweight structures.
Full Text
Reference
Ajinkya P. E., Madhu, M. C., Arunbharathi, R.,Deepak S, Narendra, S., Revathi, R.and Mayakannan, S., Optimization of Mechanical Properties of Cordia dichotoma/Alumina Nanoparticle Reinforced Epoxy Nanocomposites Under Alkali Treatment Using ANN Techniques, J. Environ. Nanotechnol., 14(2), 525–540(2025).
https://doi.org/10.13074/jent.2025.06.2521549
Alshahrani, H. and Vr, A. P., Mechanical, wear, and fatigue behavior of alkali-silane-treated areca fiber, RHA biochar, and cardanol oil-toughened epoxy biocomposite, Biomass Convers. Biorefinery, 14(5), 6609–6620(2024).
https://doi.org/10.1007/s13399-022-02691-y
Aruna, M., Rajan, V. V., Prabagaran, S., Karthikeyan, N., Anderson, A., Venkatesh, R., Mohanavel, V.,Al Obaid, S. and Salmen, S. H., Featuring of alumina nanoparticle and NaOH treated flax fiber on function properties of polypropylene composites, J. Polym. Res., 32(2), 35(2025).
https://doi.org/10.1007/s10965-025-04262-x
Balguri, P. K., Latha, A., Kaur, L., Verma, R., Kumar, D. S., Ramasree, S., Krishna, A. R., Soudagar, M. E. M. and Nagabhooshanam, N., Characterization of vinyl silane–treated areca nut woven fiber and bronze filler toughened polyester composite, Biomass Convers. Biorefinery, 15(9), 14429–14439(2025).
https://doi.org/10.1007/s13399-024-06088-x
Biswas, B., Hazra, B., Sinha, A. and Majumdar, A., Effect of incorporation of sub-micronic zirconia particles on the mechanical and thermal behaviour of alkali-treated jute fibre-reinforced epoxy composites, Mater. Sci. Technol., 02670836251340767(2025).
https://doi.org/10.1177/02670836251340767
Chaudhary, S., Gairola, S. and Sharma, H., Influence of the fruit waste fillers on the thermal, mechanical, and morphological properties of flax/epoxy composites, Proc. Inst. Mech. Eng. Part. J. Mater. Des. Appl., 238(3), 534–541(2024).
https://doi.org/10.1177/14644207231192474
Dhilipkumar, T., Venkatesan, R., Kim, S. -C., P, K., Murali, A. P., Shankar, K. V., and Almutairi, T. M., Assessing the structural and free vibrational performance of areca/ ramie fibre composite reinforced with graphene nanofiller, Ind. Crops Prod., 222, 119599(2024).
https://doi.org/10.1016/j.indcrop.2024.119599
Jiyas, N., Sasidharan, I. and Kumar, K. B., Enhancing mechanical performance of biodegradable automotive composites with EPO and graphene, Discov. Mech. Eng., 3(1), 2(2024).
https://doi.org/10.1007/s44245-024-00033-y
Kavya, N., Nagaraja, N. and Banagar, A. R., Studies on the effect of alkali treatment on sustainable green composites reinforced with cenosphere and areca fiber in the polyester, J. Indian Acad. Wood Sci., 22(1), 227–242(2025).
https://doi.org/10.1007/s13196-025-00377-2
Kumar, J. V. S. P. and Sivakumar, N. S., Effect of Silane Grafting of PET Foam and Areca Fiber on Hot Water Aged Vinyl Ester Composite, Fibers Polym., 26(4), 1729–1743(2025).
https://doi.org/10.1007/s12221-025-00896-2
Mayakannan, S., Raj, J. B., Raja, V. L. and Nagaraj, M., Effectiveness of silicon nanoparticles on the mechanical, wear, and physical characteristics of PALF/sisal fiber–based polymer hybrid nanocomposites, Biomass Convers. Biorefinery, 13(14), 13291–13305(2023).
https://doi.org/10.1007/s13399-023-04654-3
Meravi, M. K. and Panchore, V., Tribological and mechanical characteristics of glass/flax fiber-ZnO reinforced epoxy hybrid composite, Colloid Polym. Sci., 303(3), 411–426(2025).
https://doi.org/10.1007/s00396-024-05356-6
Mulinari, D. R., Voorwald, H. J., Cioffi, M. O.and Da Silva, M. L., Cellulose fiber-reinforced high-density polyethylene composites—Mechanical and thermal properties, J. Compos. Mater., 51(13), 1807–1815(2017).
https://doi.org/10.1177/0021998316665241
Natrayan, L., Surakasi, R., Kaliappan, S., Muthu, G., Paramasivam, P. and Shanmugam, K., Effectiveness of natural dye adsorption on ILSS and optical properties of bio synthesised TiO2 nano particles and reinforced with flax seed fiber/epoxy-based hybrid composites, Discov. Appl. Sci., 6(3), 125(2024).
https://doi.org/10.1007/s42452-024-05758-9
Oun, A., Alajarmeh, O., Manalo, A., Abousnina, R.and Gerdes, A., Durability of hybrid flax fibre-reinforced epoxy composites with graphene in hygrothermal environment, Constr. Build. Mater., 420, 135584(2024).
https://doi.org/10.1016/j.conbuildmat.2024.135584
Oun, A., Manalo, A., Alajarmeh, O., Abousnina, R. and Gerdes, A., Influence of Elevated Temperature on the Mechanical Properties of Hybrid Flax-Fiber-Epoxy Composites Incorporating Graphene, Polym., 14(9), 1841(2022a).
https://doi.org/10.3390/polym14091841
Oun, A., Manalo, A., Alajarmeh, O., Abousnina, R. and Gerdes, A., Long-Term Water Absorption of Hybrid Flax Fibre-Reinforced Epoxy Composites with Graphene and Its Influence on Mechanical Properties, Polym., 14(17), 3679(2022b).
https://doi.org/10.3390/polym14173679
Padmavathy, S., Ramya, G. and Selvabharathi, R., Effect on one-type dipping coating method of microstructure and physical properties of Indian almond fiber (IAF)/titanium oxide (TiO2)/zirconium oxide (Zr2O3)/carbon nanotube (CNT) inorganic-organic nanocomposite materials, Biomass Convers. Biorefinery, 14(24), 31561–31573(2024).
https://doi.org/10.1007/s13399-023-04983-3
Parodo, G., Ceccacci, A., Iannitti, G., Ruggiero, A., Sorrentino, L. and Turchetta, S., Performance Analysis of Flax/Polypropylene Laminates Manufactured by Vacuum Bagging Prepreg Process, J. Mater. Eng. Perform., 34, 15345–15358 (2025)
https://doi.org/10.1007/s11665-025-11231-4
Raghavendra, S., Chandra, S. A., Kn, M., Suresh, S., Sv, M., Arun, R. K., Ss, P., Sn, D., Kb, S. K. and Rs, R., Influence of fibre ratio and chemical treatment on the properties of hybrid epoxy composites reinforced with areca and banana fibre, J. Indian Acad. Wood Sci., 22(1), 218–226(2025).
https://doi.org/10.1007/s13196-025-00376-3
Raja, T. and Devarajan, Y., A novel way of converting waste-enriched composites to lightweight, biodegradable resources: a property analysis, Biomass Convers. Biorefinery, 14(16), 19431–19441(2024a).
https://doi.org/10.1007/s13399-023-03872-z
Raja, T. and Devarajan, Y., Mechanical and thermal stability of Millettia pinnata fibre-reinforced ZrO2 nanofiller particulates polyester composite — an experimental study, Biomass Convers. Biorefinery, 14(19), 24041–24048(2024b).
https://doi.org/10.1007/s13399-023-04837-y
Mohammad, M. M., Shanmuga, M. P. and Vijayaraj, M., Production and Characterization of Silane-treated Sisal and Flax Fibers with Mechanical Properties Enhanced through TiO2 Reinforcement, J. Environ. Nanotechnol., 13(4), 102–107(2024).
https://doi.org/10.13074/jent.2024.12.244982
Sachin, S., Harak, K., Krishnaveni, K. Karthick, K. Chinnarasu, P., Venkata, H. P, Tonk, A. and Mayakannan, S., Experimental Study on the Mechanical Properties of Hybrid Areca and Abaca Fiber Reinforced Polymer Composites, J. Environ. Nanotechnol., 13(4), 92–101(2024).
https://doi.org/10.13074/jent.2024.12.244977
Sai, K. G., Investigation on mechanical and morphological properties of areca-nylon fiber with RVE composites (recycled vinyl ester), Biomass Convers. Biorefinery, 14(24), 31679–31685(2024).
https://doi.org/10.1007/s13399-023-05000-3
Siddiqui, M. A. S., Rabbi, M. S. and Rahman, Md. T., An experimental review on enhancing the low and high-velocity impact resistance of NFCs through nanoparticle reinforcement, J. Reinf. Plast. Compos., 44, 17-18 (2024).
https://doi.org/10.1177/07316844241240569
Subbiah, A., Chockalingam, P., Munimathan, A. and Mayakannan, K., Effect of fiber orientation on interlaminar shear stresses and thermal property of sisal fiber reinforced epoxy composites, Matér. Rio. Jan., 29(4), e20240491(2024).
https://doi.org/10.1590/1517-7076-rmat-2024-0491
Tavadi, A. R., Melese, K. G., Basheer, D., Kerur, M. R. H., Sarapure, S., Mohan, N., and G L, U., Investigation on tribo-mechanical behaviour of areca fibre reinforced alumina filled epoxy composites, Phys. Scr., 100(5), 055968(2025a).
https://doi.org/10.1088/1402-4896/adcd06
Tavadi, A. R., Basheer, D., Melese, K. G., Kumaresan, K., Mohan, N., Kerur, M. R. H. and Shashidhara, L. C., Experimental analysis of mechanical properties and FTIR analysis of areca fiber-reinforced epoxy composites incorporating Al2O3, J. Ind. Text., 55, 15280837241313217(2025b).
https://doi.org/10.1177/15280837241313217
Venkatesh, R., Effect of boron carbide filler on the mechanical properties of flax fiber reinforced epoxy composites, Interact., 245(1), 368(2024).
