Impact of Montmorillonite Nanoclay on the Performance of Alkali-treated Agave/Epoxy Biocomposites
J. Environ. Nanotechnol., Volume 14, No 4 (December 2025) pp. 279- 288
Abstract
This study investigates the influence of montmorillonite nanoclay (MMT) filler on the mechanical and structural performance of alkali-treated Agave sisalana fiber-reinforced epoxy composites. Six composite formulations (AM1–AM6) were fabricated with constant epoxy content (60 wt.%) and varying fiber and nanoclay percentages. Composites AM1 to AM5 incorporated MMT filler (1.5–7.5 wt.%) along with agave fiber (32.5–38.5 wt.%), while AM6 served as the control sample without nanoclay. Mechanical tests, including tensile, flexural, impact, and Shore D hardness measurements, were conducted. Water absorption characteristics and morphological analysis using scanning electron microscopy (SEM) were also evaluated. The AM4 composite (3 wt.% MMT, 37 wt.% fiber) exhibited the highest tensile strength (68.4 MPa), flexural strength (110.1 MPa), hardness (88.7 Shore D), and impact strength (36.8 J), along with the lowest water uptake (10%). SEM micrographs confirmed superior fiber–matrix adhesion and uniform nanoclay dispersion at the optimal filler loading. Excessive nanoclay loading (AM1, 7.5 wt.%) caused particle agglomeration, leading to performance deterioration. Overall, 3 wt.% MMT was identified as the optimum filler concentration, highlighting the synergistic role of nanoclay and treated natural fibers in enhancing epoxy composite performance.
Full Text
Reference
Achachlouei, B. F. and Zahedi, Y., Fabrication and characterization of CMC-based nanocomposites reinforced with sodium montmorillonite and TiO2 nanomaterials, Carbohydr. Polym., 199, 415-425 (2018).
https://doi.org/10.1016/j.carbpol.2018.07.031
Anamika, C. R., Parvathy, B. and Sasikanth, S. M., Current advances in the nanofiber (NF) based polymer composites, Turk. J. Comput. Math. Educ., 12(6), 7-22(2021).
https://doi.org/10.17762/TURCOMAT.V12I6.1249
Aravinth, K., Aravind. K. and Ramakrishnan, T., Study on properties of new biodegradable plant fiber (agave decipiens) for polymer reinforcement, Global NEST J., 25(9), 31-40(2023).
https://doi.org/10.30955/gnj.005219
Archibong, F. N., Orakwe, L. C., Ogah, O. A.,Mbam, S. O., Ajah, S. A., Okechukwu, M. E.,Igberi, C. O., Okafor, K. J., Chima, O.and Ikelle, I. I., Emerging progress in montmorillonite rubber/polymer nanocomposites: A review, J. Mater. Sci., 58(6), 2396-2429(2023).
https://doi.org/10.1007/s10853-023-08173-4
Arumugam, C., Arumugam, G. S., Ganesan, A., Sivakumar, P. M., Damodharan, K., Doble, M.and Muthusamy, S., Novel short Agave americana based biocomposite and nanobiocomposites for automotive applications, Int. J. Lightweight Mater. Manuf., 7(4), 556-571(2024).
https://doi.org/10.1016/j.ijlmm.2024.03.003
Atmakuri, A., Palevicius, A., Vilkauskas, A.and Janusas, G., Review of hybrid fiber based composites with nano particles—material properties and applications, Polym., 12(9), 2088(2020).
https://doi.org/10.3390/polym12092088
Balaji, N., Balasubramani, S., Ramakrishnan, T.and Sureshbabu, Y., Experimental investigation of chemical and tensile properties of sansevieria cylindrica fiber composites, Mater. Sci. Forum., 979, 58-62(2020).
https://doi.org/10.4028/www.scientific.net/MSF.979.58
Campo, A. M. D., Robledo-Ortíz, J. R., Arellano, M., Jasso-Gastinel, C. F., Silva-Jara, J. M.,López-Naranjo, E. J. and Pérez-Fonseca, A. A., GLYCIDYL Methacrylate-Compatibilized Poly (Lactic Acid)/Nanoclay/Agave Fiber Hybrid Biocomposites: Effect on The Physical and Mechanical Properties, Rev. Mexi. Ing. Quím., 19(1), 455-469 (2020).
https://doi.org/10.24275/rmiq/Mat627
Fonseca, A. A. P., Rodrigue, D., Campo, A. S. M. D.and Ortíz, J. R. R., Polylactic acid-agave fiber biocomposites: processing, properties, weathering performance, and biodegradation, Polylactic acid compos., xxxx, 13-30(2024).
https://doi.org/10.1515/9783111067285-002
Gillela, S., Yadav, S. M., Kelkar, B. U., Sihag, K., Dangtungee, R., Bhuyar, P., Lee. S. H., Fatriasari. W., Wibowo. E. S. and Sinha, A., Advancing thermoset polymer composites with nanoclay reinforcement: a comprehensive investigation within composite interfaces, Compos. Interfaces., 31(12), 1615-1657(2024).
https://doi.org/10.1080/09276440.2024.2373486
Gomez, N. A., Grech, B. E., Muscat, M., Muscat-Fenech, C. D., Camilleri, D., Sinagra, E. and Lanfranco, S., Chemical and physical modifications of the surface of sisal agave fiber used as a reinforcement in epoxy resin–A Review, J. Nat. Fibers., 21(1), 2390077(2024).
https://doi.org/10.1080/15440478.2024.2390077
Gudapati, S. P. K., Chidambaranathan, S.and Prasad, A. R., Influence of nanoclay on thermal properties of wild cane grass fiber-reinforced polyester composites, Mater. Today Proc., 23, 632-636(2020).
https://doi.org/10.1016/j.matpr.2019.05.434
Gurusamy, M., Thirumalaisamy, R., Karuppusamy, M. and Sivanantham, G., Pistachio shell biochar as a reinforcing filler in short Turkish hemp fiber composites: a path toward sustainable material, J. Polym. Res., 32(4), 1-26(2025).
https://doi.org/10.1007/s10965-025-04338-8
Hasan, K. F., Horváth, P. G. and Alpár, T., Potential natural fiber polymeric nanobiocomposites: A review, Polym., 12(5), 1072(2020).
https://doi.org/10.3390/polym12051072
Hossain, S. I., Kukushkina, E. A., Izzi, M.,Sportelli, M. C., Picca, R. A., Ditaranto, N. and Cioffi, N., A review on montmorillonite-based nanoantimicrobials: state of the art, Nanomater., 13(5), 848(2023).
https://doi.org/10.3390/nano13050848
Hosseini, S. B., Natural fiber polymer nanocomposites, Fiber Reinf. Nanocompos. Fundam. Appl., 279-299(2020).
https://doi.org/10.1016/B978-0-12-819904-6.00013-X
Idumah, C. I., Okonkwo, U. C. and Obele, C. M., Recently emerging advancements in montmorillonite polymeric nanoarchitectures and applications, Cleaner Mater., 4, 100071(2022).
https://doi.org/10.1016/j.clema.2022.100071
Karuppusamy, M., Thirumalaisamy, R., Palanisamy, S., Nagamalai, S., Massoud, E. E. S. and Ayrilmis, N., A review of machine learning applications in polymer composites: advancements, challenges, and future prospects, J. Mater. Chem. A., 13(22), xx(2025).
https://doi.org/10.1039/D5TA00982K
Kenned, J. J., Sankaranarayanasamy, K.and Kumar, C. S., Chemical, biological, and nanoclay treatments for natural plant fiber-reinforced polymer composites: A review, Polym. Polym. Compos., 29(3), 1011-1038(2021).
https://doi.org/10.1177/0967391120942419
Kıranşan, M., Soltani, R. D. C., Hassani, A., Karaca, S. and Khataee, A., Preparation of cetyltrimethylammonium bromide modified montmorillonite nanomaterial for adsorption of a textile dye, J. Taiwan Inst. Chem. Eng., 45(5), 2565-2577(2014).
https://doi.org/10.1016/j.jtice.2014.06.007
Krishnadev, P., Subramanian, K. S., Lakshmanan, A., Ganapathy, S., Raja, K. and Rajkishore, S. K., Hydroxypropyl methylcellulose nanocomposites containing Nano fibrillated cellulose (NFC) from Agave americana L. for food packaging applications, BioRes., 16(4), 8125-8151(2021).
https://doi.org/10.15376/biores.16.4.8125-8151
Manickaraj, K., Thirumalaisamy, R., Palanisamy, S., Ayrilmis, N., Massoud, E. E. S., Palaniappan, M.and Sankar, S. L., Value‐added utilization of agricultural wastes in biocomposite production: Characteristics and applications, Ann. N. Y. Acad. Sci., 72-91, 15368(2025).
https://doi.org/10.1111/nyas.15368
Martínez, I. G. R., Rodrigue, D. and Feria, J. S., Production and characterization of films based on gelatin, agave microfibers and nanoclays, Polym. Bull., 79(3), 1437-1466(2022).
https://doi.org/10.1007/s00289-021-03560-w
Martínez, I. G. R., Rodrigue, D., Ocampo, M. L. A.,Díaz, B. H. C., Reyes, S. V. A. and Feria, J. S., Production and characterization of gelatin biomaterials based on agave microfibers and bentonite as reinforcements, Foods., 11(11), 1573(2022).
https://doi.org/10.3390/foods11111573
Mendoza, J. S., Cantú-Cárdenas, M. E.,Vazquez-Rodriguez, S., Toxqui-Terán, A.and Guerrero, L. G., Biopolymeric films obtained from the parenchyma cells of Agave salmiana leaves, Cellul., 26, 1869-1879(2019).
https://doi.org/10.1007/s10570-018-2173-9
Nair, R., Bhattacharya, A., Bhowmik, P. and Kant, R., Effect of surface modification on mechanical properties of filature silk waste and nanoclay filler-based polymer matrix composite, Polym. Polym. Compos., 29(9_suppl), S696-S706(2021).
https://doi.org/10.1177/09673911211023043
Natrayan, L., Veeman, D., Baskara, S. S., Sekar, S.,Patil, P. P., Velmurugan, G. and Mekonnen, H. F., Influence of nanosilica particle addition on mechanical and water retention properties of natural flax-and sisal-based hybrid nanocomposites under NaOH conditions, Adsorpt. Sci. Technol., 2022(5), xx(2022).
https://doi.org/10.1155/2022/4026495
Navin, M., Ramakrishnan, T., Balaji, D.and Bhuvaneswari, V., CRITIC–EDAS Approach for Evaluating Mechanical Properties of Flax/Vetiver/MFF Hybrid Composites, Polym., 17(13), 1790(2025).
