Open Access

Analysis of Structural and Electrical Properties of Aluminium Doped Lead Sulphide (PbS) Thin Film Prepared by CBD Method

S. Cheemadan, Advanced Material Lab, Department of Physics, National Institute of Technology, Thiruchirappalli, TN, India. K. Keerthana , Advanced Material Lab, Department of Physics, National Institute of Technology, Thiruchirappalli, TN, India. M.C. Santhosh Kumar santhoshmc@nitt.edu
Advanced Material Lab, Department of Physics, National Institute of Technology, Thiruchirappalli, TN, India.


J. Environ. Nanotechnol., Volume 2, No 4 (2013) pp. 28-33

https://doi.org/10.13074/jent.2013.12.132043

PDF


Abstract

We have deposited PbS and Al doped PbS thin films by chemical bath deposition. Lead acetate and thiourea were used as sources of Pb2+ and S2- respectively. The films were deposited at a pH of 12.5. The deposited films were further annealed at three different temperatures 250°C, 300°C, 350°C. The structural analysis reveals that PbS has a preferential growth at (200) planes and high crystalline PbS were obtained when the films were annealed at 300°C. Crystallite size for all the films varies from 30 to 50 nm. SEM analysis shows almost dense spherical and uniform grains were distributed upon the surface of the film. The Aluminium concentration were varied from (1,2,3 and 4 at %). The electrical conductivity of the Al doped PbS films increases upto to 3 at % and then it decreases at 4 at %. All films exhibits highly stable p-type behavior with maximum conductivity for 3% Al doped PbS films which is 13.32 (Ωcm)-1. Thereby it is concluded that 3% Al is the optimum concentration for the doping for PbS films and can be used for the application of IR detectors and sensors.

Full Text

Reference


Abbas, M. M., Shehabb, M., Al-Samuraee and N-A. Hassan Time om, Effect of Deposition on the Optical Characteristics of Chemically Deposited Nanostructure PbS Thin Films, Energy Procedia 6, 241-250(2011).

http://d x . d o i . o r g / d o i : 1 0 . 1 0 1 6 / j.egypro.2011.05.028

Chattarki,  A. N.,   Kamble,  S. S.   and Deshmukh, L. P., Role of pH in aqueous alkaline chemical  bath  deposition  of  lead sulfide  thin  films,  Mater.Lett.,  67, 39-41(2012).

http://http://dx.doi.org/10.1016/j.matlet.2011.08.105

Diwaker  Kumar ,  Garima  Agarwal , BalramTripathi ,  Devendra  Vyas  and Vaibhav Kulshrestha ,  Characterization  of PbS nanoparticles synthesized by chemical bath deposition, J.  Alloys  Compnd., 48, 463-466(2009).

http://dx.doi.org/10.1016/ j.jallcom.2009.04.127

Fern´andez-Lima, F. A., Gonz´alez-Alfaro, Y.,Larramendi. E. M., Fonseca Filho, H. D., Maia da Costa, M. E., H., Freire Jr., F. L.,Prioli, R., De Avillez, R. R., Da Silveira , E. F., Calzadilla , O., De Melo, O., Pedrero, E.  and  Hern´andez,  E.,  Structural characterization  of  chemically deposited PbS  thin films,  Mater. Sci.Engn., B, 136,  187-192(2007). 

http://http://dx.doi.org/10.1016/ j.mseb.2006.09.029

Contact Us

Powered by

Powered by OJS