Assessing the Durability, Mechanical, and Microstructural Properties of Nanosilica-enhanced Coconut Shell Concrete: A Sustainable Approach
J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 237-245
Abstract
This study explores the properties of concrete as a sustainable substitute for cement through the use of nanosilica in an eco-friendly aggregate system. Daily life generates a larger amount of coconut shell waste from the tropical zone. In India, the yearly deposition of coconut shell is about 80,000 tonnes, which is 6.7% of total agricultural waste. Crushing gravel production emits CO2, which is an environmental concern. Simultaneously, to diminish waste disposal of coconut shell can be effectively utilised as coarse aggregate in lightweight concrete. The conventional concrete (CC) was fully replaced by coconut shell coarse aggregate and crushed gravel sand (Msand) as fine aggregate in plain Portland cement. Nanosilica replaces cement in the conventional blend at 0%, 1%, 2%, 3%, and 4%. This study describes the concrete's hardened properties, such as compressive strength, splitting tensile strength, and flexural strength. Among all the mechanical performances, the N2 blend is significant. The N2 mix exhibits a trend that aligns with the correlation between compressive strength and splitting tensile strength. The transport durability performance related to capillary wick action of the optimum blend (N2 mix) has 0.018 mm/min0.5. The pore filler mechanism and pozzolanicity of 2% NS is more synergic than other combinations. The N2 mix in H2SO4 environment has less mass and strength loss. The N2 blend's morphology is robust relative to the CC mix because of the secondary C-S-H gel and homogeneous, smooth hydrated grain. As a result, the report concludes that using coconut shell as an aggregate in concrete can reduce waste disposal in landfills, while using nanosilica in place of cement can reduce CO2 emissions.
Full Text
Reference
Abdel-Shafy, H. I. and Mansour, M. S. M., Solid waste issue: Sources, composition, disposal, recycling, and valorization, Egypt. J. Pet., 27(4), 1275–1290 (2018).
https://doi.org/10.1016/j.ejpe.2018.07.003
Al Khazaleh, M., Kumar, P. K., Mohamed, M. J. S. and Kandasamy, A., Influence of coarse coal gangue aggregates on properties of structural concrete with nano silica, Mater. Today Proc., 72, 2089–2095 (2023).
https://doi.org/10.1016/j.matpr.2022.08.188
American Concrete Institute, Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary. Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary, 2014.
https://doi.org/10.14359/51688187
Amran, M., Murali, G., Makul, N., Tang, W. C. and Alluqmani, A. E., Sustainable development of eco-friendly ultra-high performance concrete (UHPC): Cost, carbon emission, and structural ductility, Constr. Build. Mater., 398, 132477 (2023).
https://doi.org/10.1016/j.conbuildmat.2023.132477
Chinnu, S. N., Minnu, S. N., Bahurudeen, A. and Senthilkumar, R., Recycling of industrial and agricultural wastes as alternative coarse aggregates: A step towards cleaner production of concrete, Constr. Build. Mater., 287, 123056 (2021).
https://doi.org/10.1016/j.conbuildmat.2021.123056
Hakeem, I. Y., Alharthai, M., Amin, M., Zeyad, A. M., Tayeh, B. A. and Agwa, I. S., Properties of sustainable high-strength concrete containing large quantities of industrial wastes, nanosilica and recycled aggregates, J. Mater. Res. Technol., 24, 7444–7461 (2023).
https://doi.org/10.1016/j.jmrt.2023.05.050
He, J., Kawasaki, S. and Achal, V., The utilization of agricultural waste as agro-cement in concrete: A review, Sustainability, 12(17), 6971 (2020).
https://doi.org/10.1088/1757-899X/980/1/012065
Hiloidhari, M., Bhuyan, N., Gogoi, N., Seth, D., Garg, A., Singh, A., Prasad, S. and Kataki, R., Agroindustry wastes: biofuels and biomaterials feedstocks for sustainable rural development, In: Refining Biomass Residues for Sustainable Energy and Bioproducts. Elsevier, pp 357–388 (2020)
https://doi.org/10.1016/B978-0-12-818996-2.00016-8
Huseien, G. F., A review on concrete composites modified with nanoparticles, J. Compos. Sci., 7(2), 67 (2023).
https://doi.org/10.3390/jcs7020067
Jagadisha, A., Rao, K. B., Nayak, G. and Kamath, M., Influence of nano-silica on the microstructural and mechanical properties of high-performance concrete of containing EAF aggregate and processed quarry dust, Constr. Build. Mater., 304, 124392 (2021).
https://doi.org/10.1016/j.conbuildmat.2021.124392
Koul, B., Yakoob, M. and Shah, M. P., Agricultural waste management strategies for environmental sustainability, Environ. Res., 206, 112285 (2022).
https://doi.org/j.envres.2021.112285
Lavanya, G. and Jegan, J., Evaluation of relationship between split tensile strength and compressive strength for geopolymer concrete of varying grades and molarity, Int. J. Appl. Eng. Res, 10(15), 35523–35527 (2015).
https://doi.org/10(15):35523-35529
Li, L. G., Zheng, J. Y., Ng, P.-L. and Kwan, A. K. H., Synergistic cementing efficiencies of nano-silica and micro-silica in carbonation resistance and sorptivity of concrete, J. Build. Eng., 33, 101862 (2021).
https://doi.org/10.1016/j.jobe.2020.101862
Manigandan, N. and Ponmalar, V., M100 concrete probing on quinary cementitious matrix incorporated with industrial ferrochrome slag sand, Constr. Build. Mater., 420, 135478 (2024).
https://doi.org/10.1016/j.conbuildmat.2024.135478
Manigandan, N. and Ponmalar, V., Ferrochrome slag and manufactured sand as fine aggregate replacement in concrete and mortar—a brief review, Indian J Sci Technol, 13, 2657–2667 (2020).
https://doi.org/10.1007/s10163-023-01710-y
Nagarajan, M. and Vijayan, P., Some investigation on ternary powder (binder) technology incorporated with ferrochrome slag as fine aggregate in concrete, J. Mater. Cycles Waste Manag., 25(5), 2822–2834 (2023).
https://doi.org/10.1007/s10163-023-01710-y
Ortega, F., Versino, F., López, O. V. and Garc’ia, M. A., Biobased composites from agro-industrial wastes and by-products, Emergent Mater., 5(3), 873–921 (2022).
https://doi.org/10.1007/s42247-021-00319-x
Pappu, A., Saxena, M. and Asolekar, S. R., Solid wastes generation in India and their recycling potential in building materials, Build. Environ., 42(6), 2311–2320 (2007).
https://doi.org/10.1016/j.buildenv.2006.04.015
Paul, S. C., Van Rooyen, A. S., van Zijl, G. P. A. G. and Petrik, L. F., Properties of cement-based composites using nanoparticles: A comprehensive review, Constr. Build. Mater., 189, 1019–1034 (2018).
https://doi.org/10.1016/j.conbuildmat.2018.09.062
Rahman, I., Singh, P., Dev, N., Arif, M., Yusufi, F. N. K., Azam, A., Alam, M. M., Singh, S., Chohan, J. S., Kumar, R. and others, Improvements in the engineering properties of cementitious composites using nano-sized cement and nano-sized additives, Materials (Basel)., 15(22), 8066 (2022).
https://doi.org/10.3390/ma15228066
Ramasubramani, R., Study on the Behavior of Axially Loaded Coconut Shell Concrete Column Using M-Sand in Its Place of R-Sand, ECS Trans., 107(1), 1723 (2022).
https://doi.org/10.1149/10701.1723ecst
Sahoo, S., Das, B. B. and Mustakim, S., Acid, alkali, and chloride resistance of concrete composed of low-carbonated fly ash, J. Mater. Civ. Eng., 29(3), 4016242 (2017).
https://doi.org/10.17485/ijst/2015/v8i19/72266
Seifan, M., Mendoza, S. and Berenjian, A., Mechanical properties and durability performance of fly ash based mortar containing nano-and micro-silica additives, Constr. Build. Mater., 252, 119121 (2020).
https://doi.org/10.1016/j.conbuildmat.2020.119121
Sekar, A. and Kandasamy, G., Study on durability properties of coconut shell concrete with coconut fiber, Buildings, 9(5), 107 (2019).
https://doi.org/10.3390/buildings9050107
Soomro, M., Tam, V. W. Y. and Evangelista, A. C. J., Industrial and agro-waste materials for use in recycled concrete, In: Recycled Concrete. Elsevier, pp 47–117 (2023).
https://doi.org/10.1016/B978-0-323-85210-4.00009-6
Tam, V. W. Y., Soomro, M. and Evangelista, A. C. J., A review of recycled aggregate in concrete applications (2000--2017), Constr. Build. Mater., 172, 272–292 (2018).
https://doi.org/10.1016/j.conbuildmat.2018.03.240
Vivek, D., Elango, K. S., Saravanakumar, R., Rafek, B. M., Ragavendra, P., Kaviarasan, S. and Raguram, E., Effect of nano-silica in high performance concrete, Mater. Today Proc., 37, 1226–1229 (2021).
https://doi.org/10.1016/j.matpr.2020.06.431
Zhang, L. W., Sojobi, A. O., Kodur, V. K. R. and Liew, K. M., Effective utilization and recycling of mixed recycled aggregates for a greener environment, J. Clean. Prod., 236, 117600 (2019).