Open Access

Incorporation of Nanoalumina in Potassium Feldspar-based Phosphoric Acid Activated Geopolymer Composites: A Sustainable Approach

M. Nanthini, Department of Civil Engineering, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Chennai, TN, India R. Ganesan, Department of Civil Engineering, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Chennai, TN, India V. Jaganathan jaganathanvenugopal.sse@saveetha.com
Department of Civil Engineering, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Chennai, TN, India


J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 89-98

https://doi.org/10.13074/jent.2024.09.243840

PDF


Abstract

This study investigates the potential of potassium feldspar-phosphate-based geopolymer concrete as a sustainable replacement to traditional concrete, addressing the environmental concerns associated with CO2 emissions during cement production. While geopolymer concrete offers a promising path towards sustainability, its performance often falls short of Portland cement concrete. This study investigates the use of nanoalumina in improving the performance of geopolymer concrete. A ternary mix was formulated with potassium feldspar powder, metakaolin and rice husk ash, incorporating varying percentages of nanoalumina geopolymer concrete mixes. The mechanical characteristics of the resulting geopolymer composites were assessed through compressive and split tensile strength tests. The findings revealed that a 4% nanoalumina dosage (GC-N4) yielded the most significant improvement in strength and durability. The GC-N4 mix performed superior in all metrics, demonstrating the highest compressive (41.82 MPa) and split tensile (3.7 Mpa) strengths. Reduction in water absorption and durability aspects were also optimum in GC-N4. These results highlight the potential of incorporating nanoalumina into a ternary mix of potassium feldspar powder, metakaolin and rice husk ash to significantly enhance the overall performance of geopolymer concrete, promoting its wider adoption as a sustainable construction material.

Full Text

Reference


Adewuyi, Y. G., Recent Advances in Fly-Ash-Based Geopolymers: Potential on the Utilization for Sustainable Environmental Remediation, ACS Omega, 6(24), 15532–15542 (2021)

https://doi.org/10.1021/acsomega.1c00662

Almutairi, A. L., Bassam, A. T., Adeyemi, A., Haytham, F. I. and Abdullah, M. Z., Potential Applications of Geopolymer Concrete in Construction: A Review, Case Stud. Constr. Mater., 15, e00733 (2021).

https://doi.org/10.1016/J.CSCM.2021.E00733

Amran, M., Amin, A., Chu, S. H., Roman, F., Sani, H., Afonso, A. and Nikolai, V., Long-Term Durability Properties of Geopolymer Concrete: An in-Depth Review, Case Stud. Constr. Mater., 15, e00661 (2021)

https://doi.org/10.1016/J.CSCM.2021.E00661

Awoyera, P. and Adeyemi, A., A Critical Review on Application of Alkali Activated Slag as a Sustainable Composite Binder, Case Stud. Constr. Mater., 11, e00268. (2019)

https://doi.org/10.1016/J.CSCM.2019.E00268

Çelik, A. İ., Yasin, O. Ö., Alireza, B. and Ibrahim, Y. H., Mechanical Performance of Geopolymer Concrete with Micro Silica Fume and Waste Steel Lathe Scraps, Case Stud. Constr. Mater., 19, e02548 (2023)

https://doi.org/10.1016/J.CSCM.2023.E02548

Chiranjeevi, K., Marykutty, A., Badrinarayan, R. and Praveenkumar, T. R., Enhancing the Properties of Geopolymer Concrete Using Nano-Silica and Microstructure Assessment: A Sustainable Approach, Sci. Rep., 13(1), 17302 (2023).

https://doi.org/10.1038/s41598-023-44491-y

Du, S., Junliang, W., Othman, A. and Xianming, S., Nanotechnology in Cement-Based Materials: A Review of Durability, Modeling, and Advanced Characterization, Nanomater. 9(9), 1213 (2019)

https://doi.org/10.3390/nano9091213

Hattaf, R., Abdelilah, A., Azzedine, S., Nouha, L., Mohamed, O. T., Moussa, G. and Redouane, M., Reusing Geopolymer Waste from Matrices Based on Metakaolin or Fly Ash for the Manufacture of New Binder Geopolymeric Matrices, Sustainability, 13(14), 8070 (2021).

https://doi.org/10.3390/su13148070

Heidrich, C., Jay, S., Berndt, M. L., Stephen, F. and Kwesi, S. C., Pathways and Barriers for Acceptance and Usage of Geopolymer Concrete in Mainstream Construction, 2015 World of Coal Ash (WOCA) Conference in Nasvhille, TN, (2015).

Jindal, B. B. and Rahul, S., The Effect of Nanomaterials on Properties of Geopolymers Derived from Industrial Byproducts: A State-of-the-Art Review, Constr. Build. Mater., 252, 119028 (2020).

https://doi.org/10.1016/J.CONBUILDMAT.2020.119028

Juenger, M. C.G., Ruben, S. and Susan, A. B., Supplementary Cementitious Materials: New Sources, Characterization, and Performance Insights, Cem. Concr. Res., 122, 257–73. (2019)

https://doi.org/10.1016/j.cemconres.2019.05.008

Le-ping, L., Cui X., Qiu, S., Yu, J. and Zhang, L., Preparation of Phosphoric Acid-Based Porous Geopolymers, Appl. Clay Sci., 50(4), 600–603 (2010)

https://doi.org/10.1016/J.CLAY.2010.10.004

Lv, Z., Maohua, Z. and Yanyu, S., Research on The Chloride Diffusion Modified Model for Marine Concretes with Nanoparticles under The Action of Multiple Environmental Factors, J. Mar. Sci. Eng., 10(12), 1852 (2022).

https://doi.org/10.3390/jmse10121852

Ma, S., Zhang, Z. and Liu, X., Comprehensive Understanding of Aluminosilicate Phosphate Geopolymers: A Critical Review, Mater., 15(17), 5961 (2022).

https://doi.org/10.3390%2Fma15175961

Mohajerani, A., Lucas, B., John, V. S., Halenur, K., John, M., Arul, A., Suksun, H. and Aeslina, A. K., Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use, Mater. 12(19), 3052 (2019).

https://doi.org/10.3390/ma12193052

Mohseni, E., Mahyar, J. K., Mahdi, K., Behnam, Z. and Babak, B., Evaluation of Mechanical and Durability Properties of Fiber-Reinforced Lightweight Geopolymer Composites Based on Rice Husk Ash and Nano-Alumina, Construction and Building Materials, 209, 532–540 (2019).

https://doi.org/10.1016/J.CONBUILDMAT.2019.03.067

Paruthi, S., Ibadur, R., Asif, H., Afzal, H. K., Ana, M. M. S. and Ehab, S., A Comprehensive Review of Nano Materials in Geopolymer Concrete: Impact on Properties and Performance, Dev. Built Environ., 16, 100287 (2023).

https://doi.org/10.1016/J.DIBE.2023.100287

Rashad, A., Effect of nanoparticles on the properties of geopolymer materials, Mag. Concr. Res., 71(24), 1283-1301 (2019).

http://dx.doi.org/10.1680/jmacr.18.00289

Said, S., Mikhail, S. and Riad, M., Recent Processes for the Production of Alumina Nanoparticles, Mater. Sci. Energy Technol., 3, 344–363 (2020)

https://doi.org/10.1016/J.MSET.2020.02.001

Shao, Q., Keren, Z., Xuejin, Z., Jin, Z. and Xiaohui, Z., Enhancement of Nano-Alumina on Long-Term Strength of Portland Cement and the Relation to Its Influences on Compositional and Microstructural Aspects, Cem. Concr. Compos., 98, 39–48 (2019).

https://doi.org/10.1016/J.CEMCONCOMP.2019.01.016

Singh, N. B. and Middendorf, B., Geopolymers as an Alternative to Portland Cement: An Overview, Construction and Building Materials, 237, 117455 (2020).

https://doi.org/10.1016/J.CONBUILDMAT.2019.117455

Qadir, A., Laith, A., Frayyeh, J. Q. and Osama, A. A. A., Geopolymer as a Green Concrete Alternative to Portland Cement Concrete: Article Review, Journal of Al-Farabi for Engineering Sciences, 1, (2022).

https://doi.org/10.59746/jfes.v1i1.16

Contact Us

Powered by

Powered by OJS