Open Access

Investigation of Snake Grass/Casuarina/Cork Filler Reinforced Bio Polymer Hybrid Composite

C. Parthasarathy, visitcps@gmail.com
Department of Mechanical Engineering, Kalasalingam Academy of Research and Education, Krishnankoil, TN, India
K. Mayandi, Department of Mechanical Engineering, Kalasalingam Academy of Research and Education, Krishnankoil, TN, India S. Karthikeyan, Department of Mechanical Engineering, Kalasalingam Academy of Research and Education, Krishnankoil, TN, India S. Senthilrajan Department of Robotics and Automation Engineering, Rajalakshmi Engineering College, Chennai, TN, India


J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 140-144

https://doi.org/10.13074/jent.2024.09.242711

PDF


Abstract

The environment is continuously affected for various reasons, prompting researchers to seek solutions from different angles. This study explores the potential of mixing polymers with and without agricultural/bio fillers such as Snake Grass / Casuarina / Cork in various volume proportions, analyzing their mechanical properties. The hybrid materials are made with the polymers and bio fillers without any change in the quality of existing polymer products, the quality of hybrid materials is assured by the results of impact, flexural, and tensile tests. Finally, the biodegradability tests revealed weight loss in a soil burial test when bio-filler was added to the polymer composite.

Full Text

Reference


Altaee, M. A. and Mostafa, N. H., Mechanical properties of interply and intraply hybrid laminates based on jute-glass/epoxy composites, J. Eng. Appl. Sci., 70, 121 (2023).

https://doi.org/10.1186/s44147-023-00293-7

ASTM D3039 (2014) In: Stand. Test Method Tensile Prop. Polym. Matrix Compos. Mater. ASTM Stand.

ASTM D790 (2014) In: Stand. Test Methods Flexural Prop. Unreinforced Reinf. Plast. Electr. Insul. Mater. ASTM Stand.

ASTM D4812 (2019) In: Stand. Test Methods Flexural Prop. Unreinforced Reinf. Plast. Electr. Insul. Mater. ASTM Stand.

Arrakhiz, F. Z., Achaby, M. El, Malha, M., Bensalah, M. O., Fassi-Fehri, O., Bouhfid, R., Benmoussa, K. and Qaiss, A., Mechanical and thermal properties of natural fibers reinforced polymer composites: Doum/low density polyethylene, Mater. Des. 43, 200–205 (2013).

https://doi.org/10.1016/j.matdes.2012.06.056

Chandramohan, P., Kalimuthu, M., Subramanian, K., Nagarajan, R., Muhammed, F. F., Al-Lohedan, H. A. and Krishnan, K., Mechanical and thermo-mechanical behaviors of snake grass fiber-reinforced epoxy composite, BioResources 19(1), 1119–1135 (2023).

https://doi.org/10.15376/biores.19.1.1119-1135

Dhakal, H., Zhang, Z. and Richardson, M., Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites, Compos. Sci. Technol., 67(7–8), 1674–1683 (2007).

https://doi.org/10.1016/j.compscitech.2006.06.019

Dixit, S., Goel, R., Dubey, A., Shivhare, P. R. and Bhalavi, T., Natural Fibre Reinforced Polymer Composite Materials - A Review, Polym. from Renew. Resour., 8(2), 71–78 (2017).

https://doi.org/10.1177/204124791700800203

Fernandes, E. M., Pires, R. A., Mano, J. F. and Reis, R. L., Bionanocomposites from lignocellulosic resources: Properties, applications and future trends for their use in the biomedical field, Prog. Polym. Sci., 38(10–11), 1415–1441 (2013).

https://doi.org/10.1016/j.progpolymsci.2013.05.013

Ganesamoorthy, R., Meenakshi Reddy, R., Raja, T., Panda, P. K., H. Dhoria, S., Nasif, O., Alfarraj, S., Manikandan, V. and Jenish, I., Studies on Mechanical Properties of Kevlar/Napier Grass Fibers Reinforced with Polymer Matrix Hybrid Composite, Adv. Mater. Sci. Eng., 2021, 1–9 (2021).

https://doi.org/10.1155/2021/6907631

Guo, W., Bao, F. and Wang, Z., Biodegradability of wood fiber/poly(lactic acid) composites, J. Compos. Mater., 47(28), 3573–3580 (2013).

https://doi.org/10.1177/0021998312467387

Jagadeesh, D., Sudhakara, P., Lee, D. W., Kim, H. S., Kim, B. S., Song, J. I., Mechanical Properties of Corn Husk Flour/PP Bio-composites, Compos. Res., 26(4), 213–217 (2013).

https://doi.org/10.7234/composres.2013.26.4.213

Kalimuthu, M., Nagarajan, R., Batcha, A. A., Suchart, S., Varada, R. A. and Nadir, A., Mechanical Property and Morphological Analysis of Polyester Composites Reinforced with Cyperus pangorei Fibers, J. Bionic. Eng., 16, 164–174 (2019).

https://doi.org/10.1007/s42235-019-0015-6

Mohanty, A. K., Misra, M. and Drzal, L. T., Sustainable Bio-Composites from Renewable Resources: Opportunities and Challenges in the Green Materials World, J. Polym. Environ., 10, 19–26 (2002).

https://doi.org/10.1023/A:1021013921916

Megahed, A. A., Agwa, M. A. and Megahed, M., Improvement of hardness and wear resistance of glass fiber-reinforced epoxy composites by the incorporation of silica / carbon hybrid nanofillers, Polym. Plast. Technol. Eng., 57(4), 251-259, (2017).

https://doi.org/10.1080/03602559.2017.1320724

Padmanabhan, R. G., Rajesh, S., Karthikeyan, S., Sivasubramanian, P., Ilyas, R. A., Nadir, A., ElSayed, M. T. and Mohamed, K., Evaluation of mechanical properties and Fick’s diffusion behaviour of aluminum-DMEM reinforced with hemp/bamboo/basalt woven fiber metal laminates (WFML) under different stacking sequences, Ain Shams Eng. J., 15(7), 102759 (2024).

https://doi.org/10.1016/j.asej.2024.102759

Parthasarathy, C., Mayandi, K., Karthikeyan, S. and Kulothungan, K., Experimental investigation of cork filler reinforced polymer composite, Mater. Today Proc., (2024).

https://doi.org/10.1016/j.matpr.2024.05.085

Parthasarathy , C., Karthikeyan, S., Padmanabhan, R. G. and Kulothungan, K., Experimental Investigation of Casuarina Filler Reinforced Polymer Composite, Recent Advances in Mechanical Engineering, Lecture Notes in Mechanical Engineering (2022).

https://doi.org/10.1007/978-981-99-2349-6_50

Pickering, K. L., Efendy, M. G. A. and Le, T. M., A review of recent developments in natural fibre composites and their mechanical performance, Compos. Part A Appl. Sci. Manuf., 83, 98–112 (2016).

https://doi.org/10.1016/j.compositesa.2015.08.038

Prabhakar, M. N., Shah, A., ur rehman, Song, J. I., Thermal and Mechanical Properties of Waste Ground Nut-shell Reinforced Polyester Composites, Compos. Res., 28(3), 118–123 (2015).

https://doi.org/10.7234/composres.2015.28.3.118

Satyanarayana, K. G., Arizaga, G. G. C., Wypych, F., Biodegradable composites based on lignocellulosic fibers—An overview, Prog. Polym. Sci., 34(9), 982–1021 (2009).

https://doi.org/10.1016/j.progpolymsci.2008.12.002

Senthilrajan, S., Venkateshwaran, N., Naresh, K., Velmurugan, R. and Gupta, N. K. Effects of jute fiber length and weight percentage on quasi-static flexural and dynamic mechanical properties of jute/polyester composites for thin-walled structure applications, Thin-Walled Structures, 179, 109719 (2022).

https://doi.org/10.1016/j.tws.2022.109719

Shah, A., ur R., Prabhakar, M. N., Lee, D. W., Kim, B. S. and Song, J. I., Development and Characterization of Oyster Shell Powder Filled Polypropylene Composite, Compos. Res., 27(5), 201–206 (2014).

https://doi.org/10.7234/composres.2014.27.5.201

Venkateshwaran, N., ElayaPerumal, A. and Jagatheeshwaran, M. S., Effect of fiber length and fiber content on mechanical properties of banana fiber/epoxy composite, J. Reinf. Plast. Compos., 30(19), 1621–1627 (2011).

https://doi.org/10.1177/0731684411426810

Contact Us

Powered by

Powered by OJS