Open Access

Reduction of Emission and Fuel Consumptions based on Mingled Nano Additives in Biodiesel

N. Krishnamoorthy, krishme86@gmail.com
Department of Mechanical Engineering, P.T.Lee Chengalvaraya Naicker College of Engineering and Technology, Kanchipuram, TN, India
R. Sathishkumar, Vellore Institute of Technology, Vellore, TN, India S. Dhivakar, Department of Mechanical Engineering, P.T.Lee Chengalvaraya Naicker College of Engineering and Technology, Kanchipuram, TN, India N. Ramanan Department of Mechanical Engineering, Sri Jayaram Institute of Engineering and Technology, Gummdipundi, Chennai, TN, India


J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 385-391

https://doi.org/10.13074/jent.2024.09.242705

PDF


Abstract

Using the lipids identified as well as extra residual cooking oil, vegetable, and animal fats, bio-diesel a substitute for fuels derived from petroleum can be produced. Since the 1970s oil crisis, there has been a resurgence of interest in using biodiesel as a fossil fuel substitute due to the fuel's rapidly rising prices, availability uncertainties, and growing environmental and greenhouse gas (GHG) concerns.To produce biodiesel, glycerin and fat or vegetable oil are separated chemically through a process termed transesterification. Glycerin, a valuable byproduct that is typically sold to be used in soaps and other products, and methyl esters, the chemical term for biodiesel, are the two products left over from the process. The industrial term for diesel derived from petroleum, petro diesel, and biodiesel have similar viscosities. Due to the nearly zero sulfur content,it is recommended to be used as an additive in diesel oil formulations to improve the lubricity of pure ultra-low sulfur diesel (ULSD).The current work focuses heavily on reducing emissions and fuel consumption in automobiles. In addition to lowering pollutants and fuel consumption, the transition metal oxide (Copper oxide) additions in nanocrystalline particle form aid in molecular combustion. To create a stable Nano fluid, soap nut biodiesel is combined with metal oxide additive and ultrasonicated. For our experimental investigation, single cylinder, air cooled, constant speed Kirloskar engine is used. The reduction of hydrocarbon (HC), carbon monoxide (CO) and nitrogen oxide (NOx) emissions is investigated. The highest break power of the biodiesel employed in the study is 3.82 KW, greater than the typical diesel's 3.23 KW. The result shows improved engine efficiency, reduced emissions, and better brake thermal efficiency.

Full Text

Reference


Bastawissi, H. A. E. and Elkelawy, M., Investigation of the flow pattern inside a diesel engine injection nozzle to determine the relationship between various flow parameters and the occurrence of cavitation, Engineering, 6(13), 923-935 (2014).

http://dx.doi.org/10.4236/eng.2014.613084

El-Din, H. A., Elkelawy, M. and Yu-Sheng, Z., HCCI engines combustion of CNG fuel with DME and H2 additives, SAE Technical Paper, 1, 1473 (2010).

https://doi.org/10.4271/2010-01-1473

ElKelawy, M., Bastawissi, H. A. E., El‐Shenawy, E. S. A., Panchal, H., Sadashivuni, K., Ponnamma, D. andWalvekar, R., Experimental investigations on spray flames and emissions analysis of diesel and diesel/biodiesel blends for combustion in oxy‐fuel burner, ASIA-PAC J. Chem Eng.,14(6), e2375 (2019).

https://doi.org/10.1002/apj.2375

Elkelawy, M., El Shenawy, E. A., Bastawissi, H. A. E., Shams, M. M. and Panchal, H., A comprehensive review on the effects of diesel/biofuel blends with nanofluid additives on compression ignition engine by response surface methodology, Energy Convers. Manag., 10, 14, 100177(2022a).

https://doi.org/10.1016/j.ecmx.2021.100177

Elkelawy, M., El Shenawy, E. A., khalaf Abd Almonem, S., Nasef, M. H., Panchal, H., Bastawissi, H. A. E. and Khalid, M., Experimental study on combustion, performance, and emission behaviours of diesel/WCO biodiesel/Cyclohexane blends in DI-CI engine, Process Saf. Environ. Prot., 149, 684-697(2021).

https://doi.org/10.1016/j.psep.2021.03.028

Elkelawy, M., Experimental investigation of intake diesel aerosol fuel homogeneous charge compression ignition (HCCI) engine combustion and emissions, Ene. Pow. Eng., 6(14), 513-526(2014).

http://dx.doi.org/10.4236/epe.2014.614045

Elkelawy, M., Yu-Sheng, Z., El-Din, H. A. and Jing-zhou, Y., A comprehensive modeling study of natural gas (HCCI) engine combustion enhancement by using hydrogen addition , SAE Technical Paper(2008a).

https://doi.org/10.4271/2008-01-1706

Elkelawy, M., Yu-Sheng, Z., El-Din, H., Jing-Zhou, Y., El Zahaby, A. and El Shenawy, E., Experimental Study on Flash Boiling and Micro-Explosion of Emulsified Diesel Fuel Spray Droplets by Shadowgraph Technology, Transactions of CSICE, 27, 306-308(2009).

Elkelawy, M., Yu-Sheng, Z., Hagar, A. E. D. and Yu, J. Z., Challenging and future of homogeneous charge compression ignition engines; an advanced and novel concepts review, J. Power Energy Syst., 2(4), 1108-1119 (2008b).

https://doi.org/10.1299/jpes.2.1108

Panwar, N. L., Kaushik, S. C. and Kothari, S., Role of renewable energy sources in environmental protection: A review. Renew. Sustain. Energy Rev., 15(3), 1513-1524(2011).

https://doi.org/10.1016/j.rser.2010.11.037

Saravanan, S. andKrishnamoorthy, N., Investigation on reduction in consequences of adding antioxidants into the algae biodiesel blend as a CI engine fuel, Fuel, 276(3), 117993 (2020).

http://dx.doi.org/10.1016/j.fuel.2020.117993

Saravanan S. and Krishnamoorthy, N., Lakshmi Narayana Rao G., Optimization of injection timing and anti-oxidants for multiple responses of CI engine fuelled with algae biodiesel blend, Fuel, 287, 119438 (2021).

https://doi.org/10.1016/j.fuel.2020.119438

Yu, J. Z., Yu-Sheng, Z., Elkelawy, M. and Kui, Q., Spray and combustion characteristics of HCCI engine using DME/diesel blended fuel by port-injection, SAE Technical Paper (2010).

https://doi.org/10.4271/2010-01-1485

Contact Us

Powered by

Powered by OJS