Open Access

Evaluation of the Mechanical Properties of Aluminium Hybrid Nano Composites Using Ultrasonic-Assisted Stir Casting Method and Reinforced with Nano-scale SiC and MoS2 Particles

D. Sudarsan, sudarsand4019.sse@saveetha.com
Department of Mechanical Engineering, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences (SIMATS), Thandalam, Chennai, TN, India
A. Bovas Herbert Bejaxhin, Department of Mechanical Engineering, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences (SIMATS), Thandalam, Chennai, TN, India S. Raj Kumar, Institute of Technology, Hawassa University, Department of Mechanical Engineering, Ethiopia A. S. Anitha, Department of Biotechnology, Karpaga Vinayaga College of Engineering and Technology, Chengalpattu, TN, India Venkat Prasat Sridhar Department of Mechanical Engineering, Rajalakshmi Engineering College, Thandalam, Chennai, TN, India


J. Environ. Nanotechnol., Volume 13, No 3 (2024) pp. 282-288

https://doi.org/10.13074/jent.2024.09.242665

PDF


Abstract

The purpose of this research is to investigate the effects of adding large quantities of reinforcing agents specifically, 3% MoS2 along with different SiC concentrations 5%, 10%, and 15% to LM25 aluminium alloys. The goal of producing these composites was to improve the material characteristics of hybrid metal matrix composites (HMMCs) by the use of ultrasonic-assisted stir casting. The study looks at the possible benefits of using particulate materials to improve the mechanical properties of metallic composites, such as silicon carbide (SiC) and molybdenum disulphide (Mo­S2). The research assesses the impact of SiC and MoS2 Nano scale additions on the mechanical and structural characteristics of LM25 composites by experimental analysis. The results of mechanical property testing show significant improvements, especially when 15% of Nano-scale SiC is included. This is mainly because the Nano-scale SiC is evenly distributed throughout the host metal.

Full Text

Reference


Arif, S., Alam, T., Ansari, A.H., and Shaikh, M.B.N., Morphological characterization, statistical modelling and tribological behaviour of aluminum hybrid nanocomposites reinforced with micro-nano-silicon carbide, Journal of Asian Ceramic Societies, 7 (4), 434–448 (2019).

https://doi.org/10.1080/21870764.2019.1665765

Ashebir, D.A., Mengesha, G.A., and Sinha, D.K., An Insight into Mechanical and Metallurgical Behavior of Hybrid Reinforced Aluminum Metal Matrix Composite, Advances in Materials Science and Engineering, 2022 1–31 (2022).

https://doi.org/10.1155/2022/7843981

Cheng, W., Wang, J., Ma, X., Liu, P., Liaw, P.K., and Li, W., A review on microstructures and mechanical properties of protective nano-multilayered films or coatings, Journal of Materials Research and Technology, 27 2413–2442 (2023).

https://doi.org/10.1016/j.jmrt.2023.10.012

Gao, X., Kai, X., Qian, W., Guan, C., Huang, L., Sun, K., Wang, T., Peng, Q., and Zhao, Y., Microstructure and mechanical property evolution of in-situ ZrB2/AA7085 nanocomposites during hot rolling, Mater Charact, 195 112503 (2023).

https://doi.org/10.1016/j.matchar.2022.112503

Kai, X., Zhao, Y., Wang, A., Wang, C., and Mao, Z., Hot deformation behavior of in situ nano ZrB2 reinforced 2024Al matrix composite, Compos Sci Technol, 116 1–8 (2015).

https://doi.org/10.1016/j.compscitech.2015.05.006

Ma, M., Huo, P., Liu, W.C., Wang, G.J., and Wang, D.M., Microstructure and mechanical properties of Al/Ti/Al laminated composites prepared by roll bonding, Materials Science and Engineering: A, 636 301–310 (2015).

https://doi.org/10.1016/j.msea.2015.03.086

Mohammad Sharifi, E., Karimzadeh, F., and Enayati, M.H., Fabrication and evaluation of mechanical and tribological properties of boron carbide reinforced aluminum matrix nanocomposites, Mater Des, 32 (6), 3263–3271 (2011).

https://doi.org/10.1016/j.matdes.2011.02.033

Nirala, A., Soren, S., Kumar, N., Khan, M.A., Islam, S., and Khan, N.A., Micro-mechanical and tribological behavior of Al/SiC/B4C/CNT hybrid nanocomposite, Sci Rep, 13 (1), 13147 (2023).

https://doi.org/10.1038/s41598-023-39713-2

Qian, W., Kai, X., Tao, R., Cao, R., Guan, C., and Zhao, Y., Investigation on high-temperature creep property and mechanism of AA6111 matrix composites reinforced by in-situ ZrB2 nanoparticles, Mater Charact, 196 112620 (2023).

https://doi.org/10.1016/j.matchar.2022.112620

Siddesh Kumar, N.G., Suresh, R., and Shiva Shankar, G.S., High temperature wear behavior of Al2219/n-B4C/MoS2 hybrid metal matrix composites, Composites Communications, 19 61–73 (2020).

https://doi.org/10.1016/j.coco.2020.02.011

Sulaiman, S., Marjom, Z., Ismail, M.I.S., Ariffin, M.K.A., and Ashrafi, N., Effect of Modifier on Mechanical Properties of Aluminium Silicon Carbide (Al-SiC) Composites, Procedia Eng, 184 773–777 (2017).

https://doi.org/10.1016/j.proeng.2017.04.156

Tao, R., Zhao, Y., Chen, G., and Kai, X., Effects of ZrB2 Nanoparticles on the Microstructures and Tensile Properties of a Hot Extruded in Situ AA6111 Composite, Metals and Materials International, 28 (12), 3145–3159 (2022).

https://doi.org/10.1007/s12540-022-01192-x

Vinayaka, N., Christiyan, K.G.J., Shreepad, S., Padhi, S.N., Dambhare, S.G., Puse, R. kumar., Gayathri, K., Kolekar, A.B., and Nagarajan, S., Tribological Behavior on Stir-Casted Metal Matrix Composites of Al8011 and Nano Boron Carbide Particles, J Nanomater, 2023 1–9 (2023).

https://doi.org/10.1155/2023/6453166

Wu, J., Kai, X., Guan, C., Xu, Z., Miao, C., Cao, R., and Zhao, Y., Microstructure evolution and mechanical properties of in-situ ZrB2/Al7085 nanocomposites during hot rolling deformation, Mater Today Commun, 32 103921 (2022).

https://doi.org/10.1016/j.mtcomm.2022.103921

Yang, R., Zhang, Z., Zhao, Y., Chen, G., Liu, M., Jiao, L., and Chen, L., Microstructure-property analysis of ZrB2 /6061Al hierarchical nanocomposites fabricated by direct melt reaction, Mater Charact, 112 51–59 (2016).

https://doi.org/10.1016/j.matchar.2015.12.012

Contact Us

Powered by

Powered by OJS